1.7380 10CRMO9-10 SEAMLESS STEEL TUBES

Mar 29, 2024

10CrMo9-10 is a special steel alloy with high temperature properties, used in the manufacture of reactors, heat exchangers, separators, spherical tanks, oil and gas tanks, liquefied gas tanks, nuclear power reactors pressure completions, liquefied petroleum gas tanks, turbine shells.

EN 10216-2 10CrMo9-10 Seamless Steel Tubes Specification
Manufacture:Seamless process
Wall thickness(WT): 2.1mm--20 mm.
Outer diameter (OD): 21 mm--509mm
Length: 6M or specified length as required.
Ends: Plain End, Beveled End, Treaded

EN 10216-2 10CrMo9-10 Seamless steel tubes shall be supplied in the relevant heat treatment conditions as specified in Table 1.

Steel grade Heat
treatment
a
Austenizing Tempering
Steel
name
Steel
number
Temperature °C Cooling
Medium
Temperature °C Cooling
medium
10CrMo9-10 1.7380 +NT b c 900 to 960 Air 680 to 750 air

Chemical composition of EN 10216-2 10CrMo9-10

Steel grade Steel number C Si Mn P max S max
10CrM09-10 1.7380 0,08 to 0,14 ≤ 0,50 0,30 to 0,70 0,025 0,020

 

Cr Mo Ni Al tot Cu
2,00 to 2,50 0,90 to 1,10 ≤ 0,30 ≤ 0,040 ≤ 0,30 c

Mechanical properties of EN 10216-2 10CrMo9-10

Steel grade Upper yield strength or proof strength
R eH or Rp 0,2 for Wall Thickness T
min.
Tensile
Strength
Rm
Elongation
A min.%
Steel name Steel
number
T ≤ 16 16 < T ≤ 40 40 < T ≤ 60 60 < T ≤ 100 l t
MPa * MPa * MPa * MPa * MPa *
10CrMo9-10 1.7380 280 280 270 - 480 to 630 22 20

Note:l = longitudinal t = transverse

Dimensions tolerances of EN 10216-2
Tolerances on outside diameter and wall thicknes

Outside Diameter D mm Tolerances on
D
Tolerances on T for a T/D ratio
    ≤ 0,025 > 0,025
≤ 0,050
> 0,050
≤ 0,10
> 0,10
D ≤ 219,1 ± 1% or ± 0.5mm
whichever is the greater
± 12,5% or ± 0.4mm whichever is the greater
D > 219,1 ± 20% ± 15% ± 12,5% ± 10% a
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T

Tolerances on inside diameter and wall thickness

Tolerances on inside diameter Tolerances on T for a T/d ratio
d d min ≤ 0,03 > 0,03
≤ 0,06
> 0,06
≤ 0,12
> 0,12
± 1% or ± 2 mm whichever is the greater (+ 2% ,0)or (+ 4 mm,0) whichever is the greater ± 20% ± 15% ± 12,5% ± 10% a
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T

Tolerances on outside diameter and minimum wall thickness

Outside diameter D mm Tolerances on D Tolerances on T min for a T min /D ratio
≤ 0,02 > 0,02
≤ 0,04
> 0,04
≤ 0,09
> 0,09
D ≤ 219,1 ± 1% or ± 0.5mm
whichever is the greater
(+ 28%,0) or (+ 0.8 mm,0) whichever is the greater
D > 219,1 + 50%
0
+ 35%
0
+ 28%
0
+ 22% a
0
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T

Tolerances on inside diameter and minimum wall thickness

Tolerances
on inside diameter
Tolerances on T min for a
T min /d ratio
d d min ≤ 0,05 > 0,05
≤ 0,1
> 0,1
± 1% or ± 2 mm
whichever is the greater
(+2%,0) or (+ 4 mm,0) whichever is the greater + 35%
0
+ 28%
0
+ 22% a
0
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T

Tolerances on exact lengths
Dimension in mm

Length L Tolerance on exact length
L ≤ 6000 +10
0
6000 < L ≤ 12 000 +15
0
L > 12 000 + by agreement
0

10CrMo9-10 Seamless Alloy Steel Tube

10CrMo9-10 EN10216 Round Alloy Seamless Steel Tube1.7380 10CrMo9-10 Seamless Steel Tube For Pressure Purposes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GNEE Group is specialised in supplying all kinds of alloy boiler tubes, high pressure boiler tubes and so on, you are welcome to purchase anytime. Contact us now.