Classification Of Stainless Steel Pipe Materials
May 31, 2023
Stainless steel pipes can be divided into Cr series (400 series), Cr Ni series (300 series), Cr Mn Ni series (200 series) and Precipitation hardening series (600 series) according to composition.
200 series - chromium nickel manganese austenitic stainless steel 300 series - chromium nickel austenitic stainless steel.
301- Good ductility, used for forming products. It can also be quickly hardened by mechanical processing. Good weldability. The wear resistance and fatigue strength are better than 304 stainless steel.
302- The corrosion resistance is the same as 304, and the strength is better due to the relatively high carbon content.
303- - By adding a small amount of sulfur and phosphorus, it is easier to machine than 304.
304- refers to 18/8 stainless steel. The GB brand is 0Cr18Ni9. 309- has better temperature resistance compared to 304.
316- The second most widely used steel grade after 304, mainly used in the food industry, pharmaceutical industry, and surgical equipment. Molybdenum is added to obtain a special corrosion-resistant structure. Due to its better resistance to chloride corrosion compared to 304 stainless steel pipes, it is also used as "marine steel". SS316 is commonly used in nuclear fuel recovery devices. Grade 18/10 stainless steel pipes usually also meet this application level.
Model 321- Except for reducing the risk of material weld corrosion due to the addition of titanium elements, other properties are similar to 304.
400 series - ferritic and Martensitic stainless steel.
408- Good heat resistance, weak corrosion resistance, 11% Cr, 8% Ni.
409- The cheapest model (British and American), usually used for automotive exhaust pipes, is a ferritic stainless steel (chromium steel).
410- Martensite (high-strength chromium steel), with good wear resistance and poor corrosion resistance.
416- The addition of sulfur improves the processing performance of the material.
420- "cutting tool grade" Martensite steel, similar to Brinell high chromium steel, the earliest stainless steel. It is also used for surgical knife, which can be made very bright.
430- Ferritic stainless steel, for decorative purposes, such as in automotive accessories. Good formability, but poor temperature and corrosion resistance.
440- High strength cutting tool steel, with slightly higher carbon content, can achieve higher yield strength after appropriate heat treatment, and its hardness can reach 58HRC, making it one of the hardest stainless steels. The most common application example is the "razor blade". There are three commonly used models: 440A, 440B, 440C, and also 440F (easy to process).
500 series - heat-resistant chromium alloy steel.
600 series - Martensite precipitation hardening stainless steel pipe.







