Functions Of Alloying Elements in P91 Alloy Pipe

Dec 30, 2024

P91 alloy tube in the alloy elements play a solid solution strengthening, diffusion strengthening and improve the oxidation resistance of steel, corrosion resistance, specifically analyzed as follows.

 

① carbon is the steel solid solution strengthening effect of the most obvious elements, with the increase in carbon content, the short-term strength of steel, plasticity, toughness decline, such as P91 martensitic steel, the rise in carbon content will accelerate the speed of carbide spheroidization and aggregation to accelerate the redistribution of alloying elements, reducing the weldability of the steel, corrosion resistance and oxidation resistance, heat-resistant steel are generally hoped to reduce the amount of carbon content, but the carbon content is too low, the strength of the steel will be reduced. P91 steel compared with 12Cr1MoV steel, carbon content by 20%, which is a comprehensive consideration of the impact of the above factors and decided.

P91 Boiler Tube

② P91 steel contains traces of nitrogen, nitrogen's role is reflected in two aspects. On the one hand, the role of solid solution strengthening, nitrogen at room temperature in the steel solubility is very small, P91 steel welded heat-affected zone in the welding heating and post-weld heat treatment process, there will be a succession of solid solution and precipitation process of VN: welded heating heat-affected zone has been formed within the austenitic organization due to the solubility of the VN, nitrogen content increases, and thereafter the degree of supersaturation in the organization of the room temperature increases in the subsequent heat treatment of the weld there are small VN precipitation, which increases the stability of the organization and improves the value of the lasting strength of the heat affected zone. On the other hand, P91 steel also contains a small amount of A1, nitrogen and its formation of A1N, A1N in more than 1 100 ℃ only a large number of dissolved into the matrix, and at lower temperatures and re-precipitation, can play a better diffusion strengthening effect.

 

③ add chromium is mainly to improve the oxidation resistance of heat-resistant steel, corrosion resistance, chromium content of less than 5%, 600 ℃ began to oxidize violently, while the chromium content of up to 5% has good oxidation resistance. 12Cr1MoV steel at 580 ℃ the following has a good resistance to oxidation, the depth of corrosion of 0.05 mm / a, 600 ℃ when the performance began to deteriorate, the depth of corrosion is 0.13 mm / a. P91 chromium content increased to about 9%, the use of temperature can reach 650 ℃, the main measure is to make the matrix dissolved in more chromium.

P91 Alloy Steel Seamless Pipe

④ Vanadium and niobium are strong carbide-forming elements, added to form a fine and stable alloy carbide with carbon, with a strong diffusion strengthening effect.

 

⑤ The addition of molybdenum is mainly to improve the thermal strength of steel, solid solution strengthening.