Grades Of Alloy Steel Boiler Tubes
Oct 11, 2023
Grades of Alloy Steel Boiler Tubes
ASTM A335
ASTM A335 pipe for high-temperature operations is a smooth, ferritic alloy steel pipe. Pipe ordered in accordance with this specification is suitable for bending, vanstoning, and related forming and welding operations.
Chemical Composition Of ASTM A335
|
Grade |
C |
Mn |
P Max |
S Max |
Si |
Cr |
Mo |
Others |
|
P5 |
0.15 Max |
0.3-0.6 |
0.025 |
0.025 |
0.5 Max |
4.00-6.00 |
0.45-0.65 |
|
|
P9 |
0.15 Max |
0.30-0.60 |
0.025 |
0.025 |
0.25-1.00 |
8.00-10.00 |
0.9-1.1 |
|
|
P11 |
0.05-0.15 |
0.3-0.6 |
0.025 |
0.025 |
0.5-1 |
1-1.5 |
0.44-0.65 |
|
|
P12 |
0.05-0.15 |
0.3-0.61 |
0.025 |
0.025 |
0.5 Max |
0.8-1.25 |
0.44-0.65 |
|
|
P22 |
0.05-0.15 |
0.3-0.6 |
0.025 |
0.025 |
0.5 Max |
0.9-2.6 |
0.87-1.13 |
|
|
P36 |
0.1-0.17 |
0.8-1.2 |
0.03 |
0.025 |
0.25-0.5 |
0.3 Max |
0.25-0.5 |
Ni:1.0-1.3,Cu 0.5-0.8,Nb 0.015-0.045,V 0.02Max,Al 0.05Max |
|
P91 |
0.08-0.12 |
0.3-0.6 |
0.02 |
0.01 |
0.2-0.5 |
8-9.5 |
0.85-1.05 |
V 0.18-0.25,N 0.03-0.07,Ni 0.4Max,Al 0.02Max,Nb 0.06-0.1,Ti 0.01 Max,Zr 0.01Max |
|
P92 |
0.07-0.13 |
0.3-0.6 |
0.02 |
0.01 |
0.5 Max |
8.5-9.5 |
0.3-0.6 |
V 0.15-0.25,N 0.03-0.07,Ni 0.4max,Al 0.02max,Nb 0.04-0.09,W 1.5-2,B 0.001-0.006,Ti 0.01max,Zr 0.01max |
EN 10216-2
These seamless steel pipes are intended for pressure applications. Steel, non-alloyed and alloy steel pipes with specified high-temperature properties.
Chemical Composition Of EN 10216-2
| Steel grade | Steel number |
C | Si | Mn | P max |
S max |
Cr | Mo | Ni |
| P235GH | 1.0345 | ≤ 0,16 | ≤ 0,35 | ≤ 1,20 | 0,025 | 0,020 | ≤ 0,30 | ≤ 0,08 | ≤ 0,30 |
| Al tot | Cu | Nb | Ti max | V | Cr+Cu+Mo+Ni | Others |
| ≥ 0,020 | ≤ 0,30 | ≤ 0,010 | 0,040 | ≤ 0,02 | ≤ 0,70 | - |

DIN 17175
DIN 17175 seamless boiler tubes are widely used in petroleum, boiler industry, thermal insulation, chemical fiber, chemical industry, medicine, machinery, paper making, mechanical equipment, refrigeration, food, energy, water conservancy, aerospace, transportation, aviation, marine, shipbuilding, environmental protection, boiler heat exchanger tubes.
Chemical composition of DIN 17175
| Standard | Grade | Chemical Components (%) | ||||||
|---|---|---|---|---|---|---|---|---|
| C | Si | Mn | P | S | Mo | Cr | ||
| DIN17175 | St 35.8 | ≤0.17 | 0.10-0.35 | 0.40-0.80 | ≤0.040 | ≤0.040 | / | / |
| St 45.8 | ≤0.17 | 0.10-0.35 | 0.40-0.80 | ≤0.040 | ≤0.040 | / | / | |
| 15Mo3 | 0.12-0.20 | 0.10-0.35 | 0.40-0.80 | ≤0.035 | ≤0.035 | 0.25-0.35 | / | |
| 13CrMo44 | 0.10-0.18 | 0.10-0.35 | 0.40-0.70 | ≤0.035 | ≤0.035 | 0.45-0.65 | 0.70-1.10 | |
| 10CrMo910 | 0.08-0.15 | ≤0.50 | 0.40-0.70 | ≤0.035 | ≤0.035 | 0.90-1.20 | 2.0-2.50 | |
JIS G3462
Usually used in heat exchangers, boilers, petroleum, chemical and other power fields, widely used because of high temperature resistance or corrosion resistance.
Chemical Composition of JIS G3462
| JIS G3462 Grade | C≤ | Si≤ | Mn≤ | P≤ | S≤ | Cr | Mo |
|---|---|---|---|---|---|---|---|
| STBA 12 | 0.10 ~0.20 | 0.10~0.50 | 0.30~0.80 | 0.035 | 0.035 | - | 0.45~0.65 |
| STBA 13 | 0.15~0.25 | 0.10~0.50 | 0.30~0.80 | 0.035 | 0.035 | - | 0.45~0.65 |
| STBA 20 | 0.10 ~0.20 | 0.10~0.50 | 0.30~0.60 | 0.035 | 0.035 | 0.050~0.080 | 0.45~0.65 |
| STBA 22 | 0.15 | 0.50 | 0.30~0.60 | 0.035 | 0.035 | 0.80~1.25 | 0.45~0.65 |
| STBA 23 | 0.15 | 0.50~1.00 | 0.30~0.60 | 0.030 | 0.030 | 1.00~1.50 | 0.45~0.65 |
| STBA 24 | 0.15 | 0.50 | 0.30~0.60 | 0.030 | 0.030 | 1.90~2.60 | 0.87~1.13 |
| STBA 25 | 0.15 | 0.50 | 0.30~0.60 | 0.030 | 0.030 | 4.00~6.00 | 0.45~0.65 |
| STBA 26 | 0.15 | 0.25~1.00 | 0.30~0.60 | 0.030 | 0.030 | 8.00~10.00 | 0.90~1.10 |





