High Pressure Boiler Tube Specifications And Appearance Quality

Feb 06, 2024

(1) GB/T3087-2008 "Seamless Steel Pipes for Low and Medium Pressure Boilers" regulations. Steel pipe specifications for various structural boilers, with outer diameters ranging from 10 to 426mm, a total of 43 types. There are 29 types in total with wall thickness 1.5~26mm. However, there are other regulations on the outer diameter and wall thickness of superheated steam pipes, large smoke pipes, small smoke pipes and arch brick pipes used in locomotive boilers.
(2) GB/T5310-2017 "Seamless Steel Pipes for High-Pressure Boilers" The outer diameter of hot-rolled pipes is 22 to 530mm, and the wall thickness ranges from 20 to 70mm. The outer diameter of cold-drawn (cold-rolled) pipes ranges from 10 to 108mm, and the wall thickness ranges from 2.0 to 13.0mm.

GB 5310 Boiler Tube

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


(3) The regulations of GB/T3087-2008 "Seamless Steel Pipe for Low and Medium Pressure Boilers" and GB/T5310-2017 "Seamless Steel Pipe for High-Pressure Boilers". Appearance quality: No cracks, folds, rolls, scabs, delamination and hair lines are allowed on the inner and outer surfaces of steel pipes. These defects should be completely removed. The cleaning depth shall not exceed the negative deviation of the nominal wall thickness, and the actual wall thickness at the cleaning location shall not be less than the minimum allowable wall thickness.
Standard:
GB/T3087-2008 - Chinese National Standard (Seamless Steel Pipe for Low and Medium Pressure Boilers) GB/T5310 -2017 - Chinese National Standard (Seamless Steel Pipe for High-Pressure Boilers)
ASME SA106-------American Boiler and Pressure Vessel Code ASME SA210--American Boiler and Pressure Vessel Code
ASME SA213 - American Boiler and Pressure Vessel Code DIN17175 - Federal German Industrial Standard High Pressure Boiler Tube Resistance Application Range

SA213 Boiler Pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This standard specifies the classification, size, shape, weight and allowable deviations, technical requirements, inspection and testing, packaging, marking and quality certificates of seamless steel pipes for boilers. This standard applies to hot-rolled seamless steel pipes produced for use in the manufacture of steam boilers, pipes, etc.