Hot Rolled And Cold Drawn Seamless Steel Pipe

Aug 21, 2024

Hot-rolled seamless steel pipe

Hot-rolled seamless steel pipe belongs to the hot rolling process of seamless steel pipe, which is mainly used in the construction industry (most underground pipeline transportation, groundwater extraction when building, boiler hot water transportation, etc.), machinery industry (bearing sleeves, processing machinery accessories), power industry, nuclear power industry, etc.

  • Characteristics of hot-rolled seamless steel pipe:

The main advantage is that hot rolling can destroy the casting structure of the steel ingot, refine the grain of the steel, and eliminate the defects of the microstructure, so as to make the steel structure dense and improve the mechanical properties.
The main disadvantages include:
(1) The tensile performance of the steel along the thickness direction is greatly deteriorated, and interlayer tearing may occur when the weld shrinks. The local strain induced by weld shrinkage often reaches several times the yield point strain, which is much larger than the strain caused by the load;
(2) Residual stress caused by uneven cooling. It may have an adverse effect on deformation, stability, fatigue resistance, etc.

hot rolled seamless steel pipe

Cold-drawn seamless steel pipe

Cold-drawn precision seamless steel pipe is a precision cold-drawn seamless pipe with high dimensional accuracy and good surface finish used for mechanical structures and hydraulic equipment. The use of precision seamless pipes to manufacture mechanical structures or hydraulic equipment can greatly save machining time, improve material utilization, and help improve product quality.

  • Characteristics of cold-drawn (rolled) precision steel pipes:

(1) Smaller outer diameter;
(2) High precision and small batch production;
(3) High precision and good surface quality of cold-drawn (rolled) finished products;
(4) More complex cross-sectional area of ​​steel pipes;
(5) More superior performance of steel pipes and denser metal.

cold rolled steel pipe

Differences between hot-rolled seamless steel pipes and cold-drawn seamless steel pipes

The differences between hot-rolled seamless steel pipes and cold-drawn seamless steel pipes include the following aspects:
Processing technology: hot rolling is hot processing, and cold drawing is cold processing. Hot rolling is rolling above the recrystallization temperature, and cold rolling is rolling below the recrystallization temperature.
Appearance: The surface of cold-rolled seamless steel pipes is bright, and the diameter is smaller than that of hot-rolled seamless steel pipes. The diameter of hot-rolled seamless steel pipes is larger than that of cold-rolled seamless steel pipes, and there is obvious oxide scale or red rust on the surface.
Precision: The precision of cold-rolled seamless steel pipe is higher than that of hot-rolled seamless steel pipe, and the price is also higher than that of hot-rolled seamless steel pipe.
Application: Hot-rolled steel pipe is used in fluid transportation, mechanical structure and other occasions with low size requirements, while cold-rolled steel pipe is used in precision instruments, hydraulic systems, pneumatics and other parts with high requirements. In terms of wall thickness, cold-drawn seamless pipe is more uniform than hot-rolled seamless pipe.
Process flow:
Hot rolling (extruded seamless steel pipe): round tube billet → heating → perforation → three-roller oblique rolling, continuous rolling or extrusion → tube removal → sizing (or reducing diameter) → cooling → billet tube → straightening → water pressure test (or flaw detection) → marking → storage
Cold drawn (rolled) seamless steel pipe: round tube billet → heating → perforation → heading → annealing → pickling → oiling (copper plating) → multi-pass cold drawing (cold rolling) → billet tube → heat treatment → straightening → water pressure test (flaw detection) → marking → storage