Identify Genuine And Fake Seamless Steel Pipes

Jan 23, 2024

  • Methods 1 to distinguish fake and inferior seamless pipes.

The surface is often pitted. Pockmarks are irregular and uneven defects on the surface of seamless steel pipes, which are caused by severe wear of the rolling grooves. Groove rolling often goes over budget as manufacturers of counterfeit and shoddy seamless steel pipes try to make a profit.

  • Method 2 to distinguish fake and inferior seamless pipes:

The surface is prone to scarring. There are two reasons:. The material of fake and inferior seamless steel pipes is uneven and contains many impurities. The guide equipment of fake and inferior material manufacturers is simple, easy to stick to steel, and easy to scar after biting into the roller.

  • Method 3 to distinguish fake and inferior seamless pipes:

Simple folding. Folds are various fold lines composed of the surface of seamless steel pipes, usually running throughout the longitudinal direction of the product. The reason for folding is that counterfeit and shoddy manufacturers seek high efficiency, excessive pressure, attack the ears, and the next rolling fold, the folded product cracks after folding, and the strength of the thick-walled seamless steel pipe is greatly reduced.

  • Method 4 to distinguish fake and inferior seamless pipes.

Simple scratches. The reason is that the equipment of manufacturers of fake and inferior materials is simple and prone to burrs and scratches on the surface of seamless steel pipes. Deep scratches reduce the strength of seamless steel pipes.

smls pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  • Method 5 to distinguish fake and inferior seamless pipes:

Simple crack attack. The reason is that its blank is adobe and has many pores. The adobe cracked due to thermal stress during cooling and cracked after rolling.

  • Method 6 to distinguish fake and inferior seamless pipes:

No metallic luster. Light red or pig iron-like color,

There are two reasons. 1. Its raw material is adobe. 2. The rolling temperature of counterfeit and shoddy materials is not standard, and the steel temperature cannot be rolled according to the specified austenite area by visual inspection, so the performance of seamless steel pipes will naturally fail.

  • Methods 7 to distinguish fake and inferior seamless pipes:

The cross section is oval. The reason is that in order to save material, the manufacturer puts too much pressure on the first two rollers. The strength of this rebar is greatly reduced and does not meet the shape standards of the rebar.

  • Method 8 to distinguish fake and inferior seamless pipes:

The transverse ribs are thin and low. The phenomenon of insufficient filling often occurs because in order to achieve a large negative tolerance, the pressure of the first few passes of the product is too high, the iron shape is too small, and the hole shape is not satisfied.

  • Method 9 to distinguish fake and inferior seamless pipes:

Seamless steel pipe has uniform composition. The cold shearing machine has a high tonnage, and the end face of the cutting head is smooth and regular, while the fake and inferior materials tend to lose meat on the surface, that is, they are uneven and have no metallic luster. And it's shiny. And because the products produced by fake and shoddy material manufacturers have less cuts, they will have big ears at the head and tail.

carbon steel pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  • Method 10 to distinguish fake and inferior seamless pipes:

The inner diameter standard is not firm. The reason is; l. The steel temperature is unstable and has Yin and Yang sides. 2. The steel composition is uneven. 3. Due to the simple equipment, low foundation strength, and large bounce of the rolling mill. The inner diameter changes greatly within the same week, and the steel bars are unevenly stressed and prone to cracking.