Implementation Standards For Small Diameter Seamless Steel Pipes

Jan 30, 2024

SMLS Steel Pipe Supplier-GNEE

1. Small-diameter seamless steel pipe for structural use (GB/T8162-2008) is a seamless steel pipe used for general structures and mechanical structures.
2. Large-diameter seamless steel pipes for fluid transportation (GB/T8163-2008) are general seamless steel pipes used to transport fluids such as water, oil, and gas.
3. Seamless steel pipes for low and medium pressure boilers (GB3087-1999) are used to manufacture superheated sanitary stainless steel pipes for low and medium pressure boilers of various structures.
High-quality carbon structural steel hot-rolled and cold-drawn (rolled) seamless steel pipes for steam pipes, boiling water pipes and superheated steam pipes for locomotive boilers, large smoke pipes, small smoke pipes and arch brick pipes.
4. Seamless steel pipes for high-pressure boilers (GB5310-1995) are high-quality carbon steel, alloy steel and stainless heat-resistant steel seamless steel pipes used for the heating surfaces of water tube boilers with high pressures and above.
5. High-pressure seamless steel pipes for fertilizer equipment (GB6479-2000) are high-quality carbon structural steel and alloy steel seamless steel pipes suitable for chemical equipment and pipelines with working temperatures of -40~400℃ and working pressures of 10~30Ma.
6. Seamless steel pipe for petroleum cracking (GB9948-88) is a seamless steel pipe suitable for furnace tubes, heat exchangers and pipelines in petroleum refineries.

small diameter smls pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Steel pipes for geological drilling (YB235-70) are steel pipes used by geological departments for core drilling. They can be divided into drill pipes, drill collars, core pipes, casings and sedimentation pipes according to their uses.
Seamless steel pipe for diamond core drilling (GB3423-82) is a seamless steel pipe used for drill pipe, core rod and casing for diamond core drilling.
Oil drilling pipe (YB528-65) is a seamless steel pipe with internal or external thickening at both ends used for oil drilling. There are two types of steel pipes: wired and unthreaded. Threaded pipes are connected with joints, while non-threaded pipes are connected with tool joints by butt welding.
Carbon steel seamless steel pipes for ships (GB5213-85) are carbon steel seamless steel pipes used in manufacturing ships' Class I pressure-resistant piping systems, Class II pressure-resistant piping systems, boilers and superheaters. The working temperature of the carbon steel seamless steel pipe wall does not exceed 450°C, and the working temperature of the alloy steel seamless steel pipe wall exceeds 450°C.
Seamless steel pipe for automobile axle casing (GB3088-82) is a high-quality carbon structural steel and alloy structural steel hot-rolled seamless steel pipe used for manufacturing automobile axle casings and drive axle housing shaft tubes.
High-pressure oil pipe for diesel engines (GB3093-86) is a cold-drawn seamless steel pipe used to manufacture high-pressure pipes for diesel engine injection systems.

small diameter steel pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Precision inner diameter seamless steel pipe for hydraulic and pneumatic cylinders (GB8713-88) is a cold-drawn or cold-rolled precision seamless steel pipe with precise inner diameter for manufacturing hydraulic and pneumatic cylinders.
Cold-drawn or cold-rolled precision seamless steel pipe (GB3639-83) is a cold-drawn or cold-rolled precision seamless steel pipe with high dimensional accuracy and good surface finish used in mechanical structures and hydraulic equipment. The use of precision seamless steel pipes to manufacture mechanical structures or hydraulic equipment can greatly save machining hours, improve material utilization, and at the same time help improve product quality.