Meaning Of Element Symbols Of Alloy Steel Pipe
Jan 19, 2024
Below we will introduce the meaning of each element and symbol in alloy steel material in detail.
1. The two digits at the beginning of the steel number indicate the carbon content of the steel, expressed as a few ten thousandths of the average carbon content, such as 40Cr.
2. The main alloying elements in steel, except for a few microalloying elements, are generally expressed in percentages. When the average alloy content is less than 1.5%, the steel number is generally marked with the element symbol instead of the content. However, in special circumstances that may cause confusion, the number "1" can also be marked after the element symbol, such as the steel number. "12CrMoV" and "12Cr1MoV", the former has a chromium content of 0.4-0.6%, the latter has a chromium content of 0.9-1.2%, and the other ingredients are all the same. When the average content of alloying elements is ≥1.5%, ≥2.5%, ≥3.5%... The content should be indicated after the element symbol, which can be expressed as 2, 3, 4, etc. accordingly. For example 18Cr2Ni4WA.

3. Alloying elements such as vanadium V, titanium Ti, aluminum AL, boron B, and rare earth RE in steel are all micro-alloying elements. Although the content is very low, they should still be marked in the steel grade. For example, vanadium in 20MnVB steel is 0.07-0.12%, and boron is 0.001-0.005%.
4. Steel should be added with "A" after the steel number to distinguish it from ordinary steel.
5. Special-purpose alloy structural steel, the steel number is preceded (or suffixed) by a symbol representing the purpose of the steel type. For example, 30CrMnSi steel specially used for rivet screws, the steel number is expressed as ML30CrMnSi.
6. For steel with low alloy and high strength, the steel number should be indicated. For example, 16Mn steel, the special steel type used for bridges is "16Mnq", the special steel type used for automobile girders is "16MnL", and the special steel type used for pressure vessels is "16MnR".





