Role Of Elements in The Zinc-aluminum-magnesium (ZAM) Method
Sep 29, 2024
As with high-strength steel, zinc-aluminum magnesium good corrosion resistance is due to its organization, and organization is determined by the chemical composition and cooling rate, the following we will explore the choice of chemical composition of zinc-aluminum-magnesium plating, as well as the role of the elements.
1, magnesium role and impact of magnesium is to improve the corrosion resistance of the first place, which has been fully analyzed earlier; secondly, in the plating bath with a slight addition of 0.1% magnesium, can improve the infiltration of the strip in the plating bath to reduce the surface tension to reduce the generation of leakage plating defects, this is because the oxide is not dense, basically in a very loose form. Can improve the strip in the plating solution in the wettability, reduce the surface tension of the plating bath, reduce the generation of leakage plating defects, this is because the magnesium oxide is very dense, basically to the existence of a very loose shape. This point and the characteristics of aluminum seems to be somewhat complementary to the use of higher aluminum content of the plating layer to produce higher alloy content of high-strength steel is of great significance. However, within the zinc-aluminum-magnesium plating solution, the higher content of magnesium, magnesium oxide is not dense problem will bring a series of side effects, become hot-dip galvanized aluminum-magnesium products production of a major difficulty.

2, the role and influence of aluminum first of all, in the zinc plating on the basis of adding aluminum can significantly improve the corrosion resistance and heat resistance, which is the same in the zinc-aluminum-magnesium plating layer; secondly, add a small amount of aluminum in galvanizing, can inhibit the zinc liquid and iron reaction, thinning the compound layer of Fe-Zn; thirdly, aluminum can inhibit the limitations of magnesium oxidation, the aluminum oxide is very dense, it can alleviate magnesium sparse oxides brought about by the The aluminum oxide is very dense, which can reduce the influence of the sparse oxide of magnesium, if it is just right, so that the oxide of aluminum and magnesium can form a film and cause defects in the product.
Of these three properties the first is only good, not bad, but the second and third are double-edged swords. Like magnesium, aluminum is found in high levels within zinc-aluminum-magnesium plating solutions. On the one hand, aluminum inhibits the reaction between zinc and iron, but the reaction between aluminum and iron is more intense, becoming the main contradiction; on the other hand, aluminum is very easy to oxidize the problem will bring a series of problems, the same zinc aluminum and magnesium products become a major problem of production.
3, the role of silicon and the impact of the addition of silicon, mainly to inhibit the reaction of aluminum and iron, thinning the compound layer between the plating and the steel base to improve processing performance, which is the same as the principle of all the high-aluminum plating.
As long as the plating layer in the aluminum higher than the eutectic composition, add silicon, the higher the aluminum content, the more silicon added. The highest aluminum-silicon plating, add about 10% silicon; followed by aluminum-zinc-silicon plating, add about 1.5% silicon; SD add 0.2% silicon, ZAM can add 0.1% silicon. In addition, silicon can also refine the grain, improve the uniformity of the organization, inhibit intergranular oxidation.

4, the role of other elements due to the composition of zinc aluminum magnesium is very complex, the process performance has become very complex, in order to use zinc, aluminum, magnesium-based components to produce qualified products, you can add a small amount of other elements to improve the performance of the hot plating process and the use of the performance of the zinc-aluminum-magnesium plating composition is known as the fourth element.
For example: to prevent the oxidation of magnesium blackening, is a difficult problem of zinc-aluminum-magnesium alloy products, some companies have adopted the method of adding alloying elements within the alloy to inhibit the oxidation of magnesium, for example, POSCO patents use the method of adding 0.01% to 0.1% gallium and 0.005% to 0.1% indium to the alloy; Shougang patents are used in the alloy to add 0.01% to 0.1% calcium, barium or 0.01% to 0.4% of lithium to solve this problem; can be added to titanium and boron to refine the grain, and play a role in inhibiting the generation of Mg2Zn11 organization; by adding rare earths, you can increase the homogeneity of the organization so as to inhibit intergranular corrosion, and further improve the corrosion resistance.


