Welding Process Of ERW Steel Pipe
Jan 03, 2024
ERW Steel Pipe Supplier-GNEE
1. Steel plate cutting
A suitable steel plate is selected as the raw material. The steel plate needs to have certain mechanical properties and chemical composition to ensure the quality of the welded pipe. Then, the steel plate is cut according to the required size, which is usually done by shears or cutting machines. The cut steel plate is cleaned to remove surface dirt and oxides.
2. Roll forming
The cut steel plate is formed by a coiler. The coiler bends the plate into a round or square tube shape through a series of rolls. When forming, the rolls of the coiling machine need to be controlled in terms of strength and speed to ensure the accuracy of the size and shape of the pipe.

3. Welding
The formed steel plate is heated by high-frequency induction to reach the melting temperature at the edges. Then, through the action of high-frequency current, the melted edges are pressed together to form a weld. Welding parameters such as current, voltage and welding speed need to be controlled during the welding process to ensure the quality of the weld.
4. Straightening
After welding, the pipe needs to go through a straightening process. Straightening is to make the straightness of the pipe meet the requirements, and eliminate the stress generated during the welding process. Mechanical or hydraulic straightening is usually used to straighten the pipe through a series of rolls or hydraulic devices.

5. Cutting
After straightening, the pipe needs to be cut according to the user's needs. Cutting can be done by sawing, flame cutting or plasma cutting. After cutting, the pipe is subjected to dimensional inspection and surface treatment.
6. Surface treatment
Welded pipes require surface treatment. The purpose of surface treatment is to remove oxides and dirt generated during the welding process, as well as to improve the corrosion resistance of the pipe. Common surface treatment methods include pickling, shot peening and galvanizing.





