What Is A105 Material

A105 is also even a forging carbon steel grade. a105 is also a material code, belongs to the special steel, is a kind of cold forging steel. a105 is a kind of low carbon steel forgings, and 20 steel similar. There are two standards, one is the U.S. standard "ASTMA105/A105M pipeline components with carbon steel forgings," the second is the Chinese standard "GB/T12228-2006 general valve carbon steel forgings technical conditions. Material Grade: A105 Standard: ASTMA105 Carbon steel forgings for piping componentsCountry and Region:USA Steel Group:Structural SteelControl:1.0402EuropeanUnion/EN Comparison1.0406EuropeanUnion/EN Comparison1.0477EuropeanUnion/EN

Comparison1.0478 EuropeanUnion/EN comparison1.0501EuropeanUnion/EN comparison

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Chemical composition of A105 material
Composition C:≤0.35 Si:≤0.35 Mn:0.6-1.05 S:≤0.050 P:≤0.040, Cu≤0.4 Ni≤0.4 Mo≤0.12 V≤0.08 Cr≤0.3
Mechanical properties are between No.20 forging steel and 16Mn forging steel.
Mechanical properties (Mpa )
Tensile strength: (σb) ≥485Mpa
Yield strength (σs) ≥250Mpa
Post-elongation (δ) ≥22%
Section shrinkage (ψ) ≥30%
Hardness≤HB187