ASTM A106 Seamless Carbon Steel Tubes For High Temperature Use
Mar 18, 2024
ASTM is the American Society for Testing and Materials, he prepared for the iron-based materials, non-ferrous materials, etc. are numbered, also known as the standard number; A106 is one of the material standard number, specifically on the seamless carbon steel pipe standard number. Its application is very wide, mainly for medium and high temperature conditions; pipe diameter range covers NPS 1/8 (DN6) to NPS 48 (DN 1200). A106 is also known as SA106, strictly speaking ASME Association absorbed the ASTM material standard, in order to distinguish, in the original standard number before the addition of the S prefix.

According to the different chemical composition of the material (mainly carbon C content) specified in the A106 standard, it is divided into three grades A, B and C or material grade.
A 106 Grade A (or write A106 Gr.A), the maximum C content of 0.25%.
A 106 Grade B (or A106 Gr. B) with a maximum C content of 0.30 per cent.
A 106 Grade C (or A106 Gr. C) with a maximum C content of 0.35 per cent.
Besides the difference of C content, the content of manganese Mn in the above three grades is also slightly different, A106 Gr. A usually has a Mn content of 0.27% to 0.93%, and A106 Gr. B and A106 Gr. C usually have a Mn content of 0.29% to 1.06%. And other elements such as phosphorus P, sulfur S, silicon Si, copper Cu, chromium Cr, molybdenum Mo, nickel Ni, vanadium V, etc. are basically the same, but their total amount should not exceed 1%.

These three material grades, due to the different content of C, so that its mechanical properties are also different. A106-A yield strength is the lowest, its minimum yield strength of 205MPa, and China's 10 # steel is basically the same; A106-B minimum yield strength of 240MPa, and China's 20 # steel is close to the A106-C yield strength of 275MPa, and China's 25Mn The yield strength of A106-C is 275MPa, which is basically the same as our 25Mn. Of course, the corresponding tensile strength is also different, in order of increasing trend; but at the same time its ductility is decreasing.




