Difference Between 45# And Q235 Steel

Feb 23, 2024

Difference 1: the carbon content of the two different

  • Q235 steel: ordinary carbon structural steel, carbon content is generally less than 0.22%, belonging to the low carbon steel.
  • 45#: is a high-quality carbon structural steel, the average carbon content of about 0.45%, belonging to the medium carbon steel. It is also called oil steel.

Q235 Pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Difference 2: the concept of the grade number is different

  • Q235 steel grade: is to indicate the yield limit of steel number 235 means that the yield value of steel is not less than 235 MPa.
  • 45# row number: is directly expressed in the steel carbon content of 10,000 points, that is, the average carbon content of steel in 0.45 per cent or so.

45# pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Difference 3: different mechanical properties

  • Q235 steel, known for its good plasticity and weldability, but lower strength and hardness, suitable for tensile and calendering processing, generally used in some of the requirements of the finished product modeling complexity, good processing occasions, such as the manufacture of steel plates, steel tubes, profiles, welded structures and so on. Welding performance is good. Generally do not do heat treatment, direct use. Due to high impurities, can not be forged can not be heat-treated.
  • 45 # compared to Q (Qu) 235 steel has a higher strength and hardness, but the corresponding plasticity is poorer, suitable for the force and abrasion resistance requirements of higher occasions. Cutting performance is relatively good. Widely used in the manufacture of metal processing machinery parts, such as the manufacture of shafts, gears, high-strength bolts, nuts and so on. It can be quenched. After its heat treatment, it has high strength and hardness.

45# is a high-quality carbon structural steel, also called tempered steel, usually, tempering treatment to obtain better mechanical properties, but also often local quenching.