Difference Between 15Mo3 And 16Mo3
Mar 25, 2024
- 15Mo3 and 16Mo3 are boiler and container steel.
1, 15Mo3 steel implementation of the German standard DIN17155 standard, 16Mo3 steel plate implementation of the European standard EN10028 standard. 15Mo3 alloy steel is generally used for low and medium-pressure boilers (working pressure is generally not greater than 5.88Mpa, operating temperature below 450 ℃) of the heated surface tubes; used for high-pressure boilers (working pressure is generally more than 9.8Mpa, the operating temperature in 450 ℃ ~ 650 ℃) of the heated surface tubes, economizer, superheater, reheater.
2, 16Mo3 steel is a foreign grade steel tube, used to make boilers or pressure vessels, corresponding to the domestic grade 12Cr1MoV.
- 15Mo3 Steel Boiler Tube chemical composition and mechanical properties:
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
Cu |
Ni |
|
15Mo3 |
0.12-0.20 |
0.10-0.35 |
1.40-0.9 |
0.035 |
0.03 |
≤0.25 |
0.25-0.35 |
0.30 |
0.30 |
15Mo3 Heat-resistant Pipe mechanical properties:
Tensile strength(MPa) 450~600
Yield strength (MPa) ≥270
Elongation(%) ≥20

- 16Mo3 Alloy Steel Pipe chemical composition and mechanical properties:
|
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Mo |
Cu |
Alt |
Als |
N |
|
0.12~0.2 |
≤0.35 |
0.4~0.9 |
≤0.025 |
≤0.010 |
≤0.3 |
≤0.3 |
0.25~0.35 |
≤0.3 |
≥0.02 |
≥0.015 |
≤0.012 |
- 16Mo3 Seamless Steel Pipe characteristics:
(1) Heat resistance;
(2) Corrosion resistance;
(3) When the Mn content is less than 5%, the patience of the weld metal is very high;
(4) When the Mn content is greater than 3%, and then very brittle;
(5) When the Mn content of 60% to 180%, the weld metal has high strength and resistance







