A335 P1 Alloy Steel Pipe
A335 P1 Alloy Steel Pipe
video
A335 P1 Alloy Steel Pipe
A335 P1 Alloy Steel Seamless Pipe
SA335 P1 Seamless Pipe for High Temperature
1/2
<< /span>
>

A335 P1 Alloy Steel Pipe

ASTM A335 Grade P1 (ASME SA335 P1, UNS K11522) is a chromium-free molybdenum alloy steel (0.5Mo) seamless pipe designed for elevated-temperature service in medium-temperature and moderate-pressure applications. It provides creep strength and microstructural stability through 0.44–0.65% molybdenum, with a recommended continuous service temperature of approximately 425–455°C depending on design conditions. It is commonly used in power plant auxiliary piping, petrochemical process lines, and heat transfer systems where carbon steel is insufficient but higher-grade Cr-Mo steels are not economically required.

Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of a335 p1 alloy steel pipe in China, also supports customized service with low price. Welcome to wholesale discount a335 p1 alloy steel pipe for sale here from our factory. Contact us for free sample.

 

A335 P1 Alloy Seamless Pipe for Boiler

 

ASTM A335 Grade P1 (ASME SA335 P1, UNS K11522) is a seamless ferritic low-alloy steel pipe designed for medium-temperature and medium-pressure high-temperature service applications. It belongs to the ASTM A335 Cr-Mo steel family but is classified as the entry-level grade containing molybdenum (0.44–0.65%) without chromium addition.

Compared with higher grades such as P11 and P22, P1 is optimized for cost-sensitive applications where moderate creep resistance is required but high-temperature oxidation resistance is not critical.

Typical applications include:

Boiler auxiliary piping systems

Medium-temperature steam pipelines

Heat exchanger and economizer piping

Refinery and chemical process lines

 

Engineering Positioning

A335 P1 should be regarded as a transition material between carbon steel and Cr-Mo alloy steels.

Carbon steel → low temperature / low pressure

P1 → medium temperature / moderate pressure

P11 / P22 → high temperature / high creep service

 

A335 P1 Seamless Alloy Pipe Specification

Steel pipes

A335 P1 Alloy Steel Pipe

Size

1/8" – 42" (DN6–DN1050)

Certificates

ISO 9001:2008 TUV SGS BV etc

Wall thickness

Sch 20 – XXS
Tolerances ASME B36.10 standard

Material

Carbon steel, Low carbon steel, Mild steel.

Packaging

Loose package, Packaged in bundles(5Ton Max) , bundled pipes with two slings at the both end for easy loading and discharging, End with Plastic caps

 

P1 Alloy Steel Chemical Composition

Element Content (%) Function
C 0.10–0.20 Strength and weldability
Mn 0.30–0.80 Deoxidation and strengthening
Si 0.10–0.50 Deoxidation
P ≤0.025 Impurity control
S ≤0.025 Brittleness control
Cr - No intentional addition (key distinction)
Mo 0.44–0.65 Creep resistance

UNS: K11522

 

P1 vs P11 vs P22 Comparison

Grade Cr (%) Mo (%) Max Service Temp Application
P1 - 0.44–0.65 ~425–455°C Medium-temp piping
P11 1.0–1.5 0.44–0.65 ~590°C High-temp steam
P22 1.9–2.6 0.87–1.13 ~600°C Power plant systems

 

P1 Alloy Steel Mechanical Properties

Tensile strength, min, (MPa)

415

Yield strength, min, (MPa)

205

Elongation, min, (%), L/T

30/20

 

P1 Alloy Steel Equivalent

ASTM ASME JIS G 3458 UNS BS DIN ISO ABS NK LRS
A335 P1 SA335 P1 STPA 12 K11597 – 17175
15Mo3
2604 II TS26 ABS 6 KSTPA 12 –
          17177
15Mo3
2604 III TW26

 

Procurement Risks & Engineering Considerations

Grade Misidentification

P1 is visually indistinguishable from carbon steel and higher alloy grades. Incorrect substitution may lead to improper material selection in high-temperature service.

 

High-Temperature Performance Limitation

At elevated temperatures, P1 may experience:

carbide spheroidization

creep strength degradation

long-term microstructural instability

Recommended maximum continuous service temperature is approximately 425–455°C depending on design conditions.

 

Hydrogen Service Limitation

P1 is not recommended for high-temperature hydrogen environments as defined by Nelson curve limits due to the absence of chromium, which reduces resistance to hydrogen attack.

 

Heat Treatment Requirement

All A335 P1 pipes must be supplied in heat-treated condition per ASTM A335 requirements to ensure microstructural stability and mechanical consistency.

 

Manufacturing & Heat Treatment

A335 P1 is manufactured by seamless processes:

Hot finished seamless pipe

Cold drawn seamless pipe

Heat treatment options include:

Normalizing + tempering

Full annealing

Subcritical annealing

Ask for our heat treatment procedure sheet + production quality control flow.

 

Applications

Medium-temperature steam piping systems

Economizer outlet piping

Refinery process heating lines

Heat exchanger piping systems

Low to medium pressure boiler systems

 

A335 Seamless Pipe MTC

A335 Seamless Pipe MTC

 

GNEE A335 Boiler Tube Customers

 

customer

 

FAQ

Q1: Difference between P1 and P11?

P1 contains no chromium and is limited to medium-temperature service, while P11 contains chromium and offers significantly higher oxidation resistance and creep strength.

 

Q2: Is preheating required for welding?

Preheating is generally not required for thin-wall sections under normal conditions; however, for thick-wall or low-temperature environments, 100–150°C preheating may be applied according to WPS.

 

Q3: Can P1 be used in hydrogen service?

P1 is not recommended for high-temperature hydrogen service per Nelson curve limitations due to lack of chromium.

 

Q4: Why is heat treatment required?

To ensure microstructural stability, reduce residual stress, and guarantee mechanical performance consistency.

Hot Tags: a335 p1 alloy steel pipe, China a335 p1 alloy steel pipe manufacturers, suppliers, factory, 45 seamless steel pipe, carbon steel pipe for fuel cell plants, API 5CT C90 Oil Tubing, Seamless steel tube and pipe for ship building, API 5CT Gr C90 Casing Tube, DIN 28180 Heat Exchangers Tubes

Send Inquiry

(0/10)

clearall