ASTM A192 Carbon Steel Seamless U Bend Tube For Boilers And Heat Exchangers

Nov 05, 2025

‌A192 U-Finned Tube‌ consists of a base tube and fins. The base tube is made of ‌A192 carbon steel pipe‌, bent into a U-shape to increase the heat transfer area. The fins, resembling a comb, are closely arranged on the outer surface of the base tube. These thin, tall metal sheets can expand the surface area of the base tube by ‌5-10 times‌.

This design induces ‌strong turbulence‌ in the flue gas as it flows through the tube bundle, breaking the thermal boundary layer and significantly enhancing heat transfer. Tests show that its ‌heat transfer coefficient can reach 2-3 times that of a bare tube‌.

 

Specification

Technical Details/Base Tube Details

Tube Diameter : 20 mm OD Min to 219 mm OD Max.

Tube Thickness : Minimum 2 mm up to 16mm

Tube Material : Carbon Steel, Stainless Steel, Alloy Steel, Corten steel, duplex Steel, Super Duplex Steel, Inconel, High Chrome High Nickle & Incolloy, CK 20 material and some other material.

 

Fin Details

Fins Thickness : Min. 0.8 mm to Max. 4 mm

Fins Height : Min 0.25" (6.35 mm) To Max.1.5" (38 mm)

Fin Density : Min 43 Fins Per Meter To Max. 287 Fins Per Meter

Material : Carbon Steel, Stainless Steel, Alloy Steel, Corten steel, Duplex Steel and Incolloy.,

 

*These are the most common fin/tube patterns. We have more than 20 different plate fin and tube combinations. Contact me for more information and options.
Helical Fin Surface
(Tube OD – Available Helical Fin Height on the Tube)
5/8″ – 3/8″, 1/2″ and 7/16″ 1″ – 3/8″, 1/2″ , 7/16″ and 5/8″ 1 1/4″ – 3/8″, 1/2″ , 7/16″ and 5/8″
15.875mm – 9.525mm, 12.7mm and 11.113mm 25.4mm – 9.525mm, 12.7mm, 11.113mm and 15.875mm 31.75mm – 9.525mm, 12.7mm, 11.113mm, and 15.875mm

"L" Footed, Embedded and other helical fin attachment options are available.

Contact me about the availability of 1 1/4″ (31.75mm) tube material

 

How to Process U-bend ASTM A192 Boiler Tubes:

- The process of manufacturing U-bend tubes involves bending straight tubes into a U-shaped configuration. The key steps in processing U-bend ASTM A192 boiler tubes include:

- Cutting straight tubes to the required length.

- Heating the tube to the appropriate temperature for bending.

- Bending the tube to the desired radius and angle.

- Cooling and inspecting the U-bend to ensure it meets quality standards.

- If necessary, additional heat treatment and testing may be performed to meet specific requirements.

 

Applications:

Power Generation

Petrochemicals Industry

Gas Processing Industry

Pharmaceuticals Industry

Pharmaceutical Equipment

Chemical Equipment

Sea Water Equipment

Heat Exchangers

Condensers

Pulp and Paper Industry

 

info-500-500A192 U bend tube for heat exchanger

Contact now