ASTM A213 T11 Alloy Steel Seamless Tube
Dec 05, 2025
ASTM A213 T11 Seamless alloy tubes description
T11 Alloy Tubes are specialized high-alloy steel pipes classified as martensitic heat-resistant steel, primarily used in high-temperature/pressure environments like heat exchangers and boiler piping.
Chemical Composition includes carbon (C), silicon (Si), manganese (Mn), phosphorus (P), sulfur (S), and alloying elements such as chromium (Cr), molybdenum (Mo), and vanadium (V). Elevated Cr/Mo content enhances corrosion resistance, high-temperature stability, and mechanical properties, while V improves toughness.
Mechanical Properties:
High strength/hardness with good toughness
Post-heat treatment values:
Tensile strength: ≥450 MPa
-Yield strength: ≥300 MPa
-Hardness: ≥200 HB
Excellent fatigue and corrosion resistance
Heat Treatment Process:
Quenching: ~900°C (hold 2h) → air cooling
Tempering: ~650°C (hold 2h) → air cooling
Resulting microstructure: Tempered martensite delivering balanced mechanical properties.
ASTM A213 T11 Chemical Composition:
| Chemical Components (%) | |||||||
| Grade | C | Mn | P | S | Si | Cr | Mo |
| T11 | 0.05-0.15 | 0.30-0.60 | ≤0.025 | ≤0.035 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 |
Heat Treatment Requirements
| Grade | UNS Number | Heat Treat Type | Subcritical Annealing or Tempering Temperature, Min or range °F [°C] |
| T11 | K11597 | full or isothermal anneal normalize and temper | 1200 [650] |
ASTM A213 T11 Seamless alloy tubes Tensile Requirements and Hardness:
| Mechanical Properties | ||||
| Grade | Tensile | Yield | Elongation | Hardness |
| Strength (Mpa) | Strength (Mpa) | (%) | (HRB) | |
| T11 | ≥415 | ≥220 | ≥30 | ≤85 |
Mechanical Testing & Grain Size Requirements
Tensile Test
For lots of less than 50 tubes: One test from a single specimen.
For lots of over 50 tubes: One test each from specimens of two tubes.
Flattening Test
One test at each end of one finished tube per lot, other than the tube used for flaring test.
Flaring Test
One test at each end of one finished tube per lot, other than the tube used for flattening test.
Hardness Test
Brinell or Rockwell hardness test on specimens from two tubes per lot.
Grain Size
Grain size determination shall be conducted on one end of one finished tube per lot to verify compliance with specified requirements.

Packaging and shipping








