ASTM A333 Grade 3 Carbon Steel Pipes
Dec 05, 2025
What is A333 GR3 Material
A333 Gr3 is a low-temperature toughness seamless steel pipe under ASTM standard, primarily composed of carbon-manganese steel. The addition of nickel (approximately 3.5%) significantly enhances its low-temperature impact resistance. The core standard requirements include:
Low-Temperature Impact Test: At -101°C, the Charpy V-notch impact energy must be ≥20J (per ASTM A370) to ensure the material resists brittle fracture in extreme cold.
Chemical Composition Control: Carbon content ≤0.19%, with very low impurities (sulfur and phosphorus ≤0.025% each) to minimize cold brittleness.
Manufacturing Process: Requires normalizing treatment to refine grain structure and improve uniformity.
A333 Gr3 V.S. A333 GR6 Chemical Composition Comparison
| Element | A333Gr3 | A333Gr6 |
|---|---|---|
| Carbon (C) | ≤0.19% | ≤0.30% |
| Manganese (Mn) | 0.31-0.64% | 0.29-1.06% |
| Phosphorus (P) | ≤0.025% | ≤0.025% |
| Sulfur (S) | ≤0.025% | ≤0.025% |
| Silicon (Si) | ≥0.10% | ≥0.10% |
| Nickel (Ni) | ~3.5% | ≤0.040% |
A333 Gr3 V.S. A333 GR6 Mechanical Properties Comparison
| Property | A333Gr3 | A333Gr6 |
|---|---|---|
| Tensile Strength | ≥450 MPa | ≥415 MPa |
| Yield Strength | ≥240 MPa | ≥240 MPa |
| Elongation | ≥30% | ≥30% |
| Impact Test Temperature | -101°C | -45°C |
| Impact Energy | ≥20J | ≥18J |
A333 GR3 Low Temperature Service Pipes specification
Equivalent
| ASTM/ASME | JIS | EN | GB |
| A333/SA333 | JIS G 3460 | EN 10216-4 | GB/T 18984 |
Applications:
Liquefied Natural Gas (LNG) Infrastructure
Transmission Pipelines: Used for long-distance LNG transportation at -162°C, such as pipelines from liquefaction plants to storage tanks. Its cryogenic resistance prevents leaks caused by cold contraction.
Tank Support Structures: The steel pipes must withstand liquid nitrogen environments at -196°C (referenced to ASME B31.3). A333Gr3's toughness meets the requirements for such dynamic loads.
Petrochemical Cryogenic Processing Equipment
Ethylene Cracking Units: In the low-temperature separation process (-45°C to -101°C), the steel pipes are used to transport media such as liquid ethylene and propylene.
Air Separation Equipment: Such as cryogenic liquid pipelines in oxygen plants, operating at temperatures as low as -183°C (liquid oxygen), requiring additional cryogenic testing as specified in ASTM A333 Appendix.
Arctic and Marine Cryogenic Engineering
Arctic Oil and Gas Fields: Subsea pipelines in -40°C environments must resist ice pressure. A333Gr3's yield strength of ≥240 MPa (ASTM A333 Table 1) ensures structural safety.
Cryogenic Pressure Vessels: Such as auxiliary piping for LNG ship storage tanks, often designed for pressures exceeding 10 MPa, requiring compliance with ASME VIII Div. 1 standards.
Test and inspection

Packaging and shipping









