ASTM A335 Grade P11 Alloy Steel Seamless Pipes

Nov 04, 2025

A335 P11‌ is a low-alloy ferritic heat-resistant steel under the ‌ASME SA335‌ standard, belonging to the chromium-molybdenum steel series, primarily used in high-temperature pressure equipment.

 

Key Production Process Points‌

‌1. Hot Forming & Heat Treatment‌

‌Normalizing:‌ Air-cooled after holding at ‌900–920°C‌ to homogenize microstructure.

‌High-Temperature Tempering:‌ Air-cooled after holding at ‌730–750°C‌ to relieve internal stress (HB ≤ 187).

‌2. Welding Process‌

‌Filler Metal Selection:‌

‌ER80S-B2L‌ (AWS A5.28) or ‌E8018-B2‌ (AWS A5.5).

‌Preheating:‌ ‌150–200°C‌ (carbon equivalent CE ≈ 0.4%).

‌Post-Weld Heat Treatment (PWHT):‌ Tempering at ‌730–750°C for 1–2 hours‌ to eliminate residual stress.

‌3. Cold Working‌

‌Bending:‌ Minimum bending radius ‌≥4D‌ to avoid inner-wall wrinkling.

‌Expanding:‌ Expansion rate ‌≤2.0%‌ to prevent intergranular cracking.

 

‌Application Scenarios‌

‌Power Industry‌

‌Subcritical Boilers:‌ High-temperature superheaters (‌500–580°C‌), reheaters, headers.

‌Ultra-Supercritical Units:‌ Outlet piping of steam-water separators (temperature gradient control required).

‌Petrochemical Industry‌

‌Heat Exchangers:‌ Reactor effluent lines in hydrocracking units (high-temperature, high-pressure H₂ environment).

‌Cracking Furnaces:‌ Convection tubes in radiant sections (anti-carburizing environment).

‌Other Industries‌

‌Syngas Plants:‌ High-temperature syngas pipelines (CO+H₂ mixed media).

‌Waste Heat Boilers:‌ High-temperature evaporator tubes (‌550–580°C‌).

 

‌Prohibited Scenarios‌

‌Creep temperature > 595°C‌ (use ‌P22/P91‌ instead).

‌Strongly reductive acid environments‌ (upgrade to ‌austenitic stainless steel‌).

 

Specification

Size 1/8NB TO 24NB IN
Standards ASTM A 335, ASME SA 335
Type Seamless
Specialized in Large Diameter Size
Outer Dimensions 19.05mm – 114.3mm
Wall Thickness 2.0mm – 14 mm
Length max 16000mm
Schedule Schedule 20 - Schedule XXS (heavier on request) up to 250 mm thk.
Form Round, Square, Rectangular, Hydraulic Etc.
Length Single Random, Double Random & Cut Length.
Tubing End Plain End, Beveled End, Treaded.

 

Chemical Compositions : A335 P11 Alloy Pipe

C, %

Mn, %

P, %

S, %

Si, %

Cr, %

Mo, %

0.015 max

0.30-0.60

0.025 max

0.025 max

0.50 max

4.00-6.00

0.45-0.65

 
Mechanical Properties : A335 P11 Alloy Pipe

Tensile Strength, MPa

Yield Strength, MPa

Elongation, %

415 min

205 min

30 min

 

Test and inspection

test

Packaging and shipping

shipping

Contact now