Boiler Bank Tubes

Mar 29, 2024

Boiler store tubes are bent formed tubes or steam generating tubes in which water is converted into steam. Boiler side tubes carry a mixture of water and steam. These tubes are made from tubes of various sizes and shapes, often with large bending radii, so some expertise in tube bending is required to avoid wrinkles, surface cracks and irregularities, ensuring the longevity of the tubes and making the boiler smooth Run efficiently.

  • What are the uses of boiler storage tubes?

It is mainly used to transfer flue gas heat and convert water into steam.
These tubes are capable of converting water from the economizer into saturated steam by exchanging flue gas heat between the tube walls.

  • What is the role of storage tubes in process boilers?

The boiler storage pipe produced by GNEE is used to connect the upper and lower steam drums in the steam drum boiler. In addition to the riser and downcomers, they are also responsible for carrying the weight of the upper steam drum. Small defects in a tube can damage adjacent tubes and steam drums, but it all depends on the point of the leak. Therefore, users must pay close attention to prevent such failures.

Each joint is secured by the expansion of the boiler tubes in the drum bore. The tube thickness is reduced by approximately 7%-11%, allowing for a good connection. This method appears to be more effective at pressures up to 120 kg/cm3. Pipe wall thinning can be determined by obtaining basic measurements of the pipe inner diameter before and after expansion.

GNEE Supply Boiler Tube

boiler bank tubebank tube for boiler