Difference Between 20G A106 C And A210 C Boiler Tube

Nov 08, 2023

Difference Between 20G, A106 C And A210 C Boiler Tube

 

 

 

20G, ASTM A106 C and ASTM 210 C boiler tubes are carbon manganese steels and can be used in subcritical and supercritical power generation boilers that require high strength and good process performance under high pressure environments.

20G comes from China’s national standard GB 5310. A106 C and A210 C belong to ASTM and ASME standards. The picture below shows a comparison of the chemical composition and mechanical properties of 20G, ASTM A106, and A-210C:

Standard

C(%)

Mn(%)

Si(%)

Cr

S(%)

P(%)

20G

0.17-0.24

0.35-0.65

0.17-0.37

≤0.25

≤0.030

≤0.030

SA-210C

≤0.27

0.29-1.06

≥0.10

≤0.4

≤0.025

≤0.025

ASTM -106C

≤0.35

0.29-1.06

≥0.10

≤0.4

≤0.035

≤0.035

Material

Tensile Strength (Mpa), Min.

Yield Strength (Mpa), Min.

20G

410-550

245

SA-210C

485

275

ASTM a-106C

485

275

20G Pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

We can know that they have similar chemical composition and physical properties. It is common for customers to use it as an alternative material. 20G seamless pipe is the most commonly used steel pipe in boiler systems. Mainly used to manufacture high-pressure boiler pipe fittings, low-temperature section superheaters, reheaters, economizers, water-cooled walls, etc.

A106B Pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ASTM A106 Grade C pipe is a commonly used C-Mn steel used in large diameter, high temperature and high pressure boilers and superheaters. Its chemical composition is similar, but its carbon and manganese content is higher. Its plasticity and toughness are also similar, but its yield strength is about 12% higher than 20G. Using A106 Gr C instead of 20G to manufacture headers (economizer, water wall, low temperature superheater and reheater header) can reduce wall thickness by about 10%, which can not only save material costs, but also reduce welding workload and improve boiler efficiency. heat transfer conditions. Its working pressure is 6~13.9MPa, and the steam temperature is 450~580℃.

210C seamless carbon steel pipe is also widely used in water-cooled walls and economizers of boiler components. Like A106C, except that its chemical composition is similar to 20G, its yield strength is about 20% higher, and its plasticity and toughness are equivalent to 20G. Due to the simple production process, the performance is good. Mainly used in water-cooled walls, economizers, low-temperature superheaters and other parts where the operating temperature is lower than 500°C.