Difference Between SS304 And SS430

Nov 07, 2023

Difference Between SS 304 And SS 430

 

There are several stainless steel series with different physical properties. According to the American Iron and Steel Institute, stainless steel can be represented by numerical values, such as 200 series, 300 series, and 400 series, of which 304 and 430 are commonly used grades. Both types have many practical industrial, medical, and household applications.

 

Type 304 Is An Austenitic Steel But 430 Is A Ferritic Steel

Generally speaking, austenitic stainless steel is represented by the 200 and 300 series, and ferritic and martensitic stainless steel is represented by the 400 series. However, the most common stainless steel is austenitic stainless steel, which has a higher chromium content and also has added nickel. 430 stainless steel is low carbon chromium ferritic stainless steel, and 304 is austenitic steel.

 

Type 304 Is Non-magnetic, But Type 430 Is Magnetic

The magnetism of stainless steel depends largely on the elements added to the alloy. Ferritic steel is pig iron, which means it is magnetic. However, austenitic steel has higher chromium and nickel content, which makes it theoretically non-magnetic. Therefore, 304 stainless steel, which contains approximately 18% chromium and 8% nickel, is nonmagnetic.

 

3040 ss pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

304 Is Less Expensive Than 430

The most popular and cheapest steel grade is type 430, which contains 17% chromium and 0.12% carbon. Since the steel contains no nickel or molybdenum, it is less expensive than any 300 series. Compared to Type 430, 304 is the most common and most expensive steel grade.

 

304 Is Best Suited For Food And Medical Applications

Type 304 has wider uses, particularly for kitchen-grade tables and utensils and other applications where corrosion resistance is not critical. Type 430 is suitable for use in areas where mildly corrosive conditions occur or where scaling resistance at moderate temperatures is required.

 

Type 304 Is Easier To Form And Weld

430 is a simple corrosion and heat resistant grade. The steel has limited weldability and should not be used in the welded condition in dynamic or impact loaded structures. Austenitic stainless steels have excellent tensile strength, ductility and toughness even at low temperatures. This means that 304SS is the easiest to weld and form of all stainless steel classes.

430 ss pipe