DIN 2391 ST35 Precision Carbon Steel Pipes
Oct 23, 2023
What Is DIN 2391 ST35 Pipe
DIN 2391 ST35 carbon steel pipes are seamless precision tubes defined by the German standard DIN 2391. ST35 is a carbon steel grade whose chemical composition meets the requirements set by the standard, and the tubes are known for their high precision, tight tolerances, and smooth surfaces, which make them suitable for applications that demand exacting specifications. The ST35 designation corresponds to a minimum tensile strength of about 340-440 MPa in the cold-drawn condition, and the material is equivalent to the EN designation E235 (1.0308).
Cold-Drawn Manufacturing
These tubes are typically cold-drawn, meaning they undergo a cold working process to achieve their final dimensions and smooth surfaces. Cold drawing enhances the mechanical properties and surface finish of the tubes and allows tight dimensional tolerances to be held, typically to the H8, H9, or H11 classes for the inside diameter of hydraulic cylinders. The cold-drawn condition also improves the fatigue behavior of the tube wall.
Chemical Composition
| Standard | Grade | C | Si | Mn | P max | S max |
|---|---|---|---|---|---|---|
| DIN 2391 | ST35 | 0.17 max | 0.35 max | 0.40 min | 0.025 | 0.025 |
Smooth Inside and Outside Surfaces
ST35 tubes have both a smooth inner and outer surface, which is essential in applications where fluid flow, such as in hydraulic systems, must remain laminar without turbulence. The smooth bore also reduces contamination entrapment and supports reliable sealing in cylinder assemblies. For honed and skived applications, the tube is subsequently processed to the specified surface finish and tolerance.
Applications
DIN 2391 ST35 carbon steel pipes are used in a wide range of applications in mechanical and automotive engineering. They are often utilized in precision machinery, hydraulic systems (cylinder barrels and piston rods), and other high-precision applications where dimensional accuracy is crucial, including shock absorbers, pneumatic cylinders, and precision shafting.
Corrosion Considerations
The corrosion resistance of carbon steel is generally limited, so additional surface treatments or coatings may be necessary to prevent corrosion in certain environments, including oiling, plating, or painting depending on the service.
Frequently Asked Questions
Q: What is DIN 2391 ST35? A: A cold-drawn seamless carbon steel precision tube grade per DIN 2391 with tight tolerances and smooth surfaces.
Q: What is the equivalent of ST35? A: The EN designation E235 (material number 1.0308).
Q: Why is ST35 used in hydraulic cylinders? A> Its tight ID tolerances and smooth bore support reliable sealing and laminar fluid flow.
Q: What is the maximum carbon content? A> 0.17 percent.
Q: Is ST35 corrosion resistant? A> No. Carbon steel needs surface treatment or coating for corrosive environments.
Q: What conditions are supplied? A> Cold drawn (BK), stress relieved, and annealed conditions with specified tolerance classes.
Need DIN 2391 precision tubes for your hydraulic application? Contact us with size, tolerance class, and quantity for a quotation.







