How to Clean Internal and External Plastic-coated Steel Pipes

Dec 05, 2023

Plastic-coated Steel Pipes Supplier-GNEE

How to Clean Internal and External Plastic-coated Steel Pipes

 

Cleaning of internal and external plastic-coated steel pipes uses solvents and emulsions to clean the steel surface to achieve the effect of removing oil, grease, dust, lubricants and similar organic substances, but it cannot remove rust, oxide scale, solder, etc. Therefore, it is only used as an auxiliary method in anti-corrosion production. Rust removal: Mainly use tools such as wire brushes to polish the steel surface to remove loose or raised oxide scale, rust, welding slag, etc.

The rust removal of hand tools can reach Sa2 level, and the rust removal of electric tools can reach Sa3 level. If there is a strong oxide scale attached to the surface of the steel, the rust removal effect of the tool will not be ideal and the depth of the anchor pattern required for anti-corrosion construction will not be achieved. Pickling: Generally, chemical and electrolytic methods are used for pickling treatment. Pipe anticorrosion uses only chemical pickling to remove scale, rust and old coatings. Sometimes it can also be used as reprocessing after sand blasting and rust removal.

Plastic-coated Steel Pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Although chemical cleaning can achieve a certain degree of cleanliness and roughness on the surface, its anchor lines are shallow and can easily cause pollution to the human body. Spray (throw) rust removal: Spray (throw) rust removal is driven by a high-power motor to rotate the spray (throw) blade at high speed, so that steel sand, steel shot, iron and other abrasives are sprayed (thrown) on the surface of the plastic-coated pipe. It can completely remove rust, oxides and dirt, and the internal and external plastic-coated pipes can achieve the required uniform roughness under the action of strong abrasive impact and friction. .

The reason is that when chromium is used in alloy steel, the type of surface oxide changes to resemble the oxides formed on pure chromium metal. When the chromium addition reaches 10.5%, the atmospheric corrosion resistance of the equal-diameter tee is significantly improved. However, when the chromium content is high, the corrosion resistance can still be improved, but not significantly. Moreover, if the surface is damaged, the exposed steel surface will repair itself by reacting with the atmosphere, re-forming this oxide, and continuing to provide protection. When steel-plastic pipes are coated with anti-corrosion coatings, they must also undergo cathodic maintenance.

A53 Carbon Steel Pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

After rust is removed from the surface of the steel plate, 95% of the surface area is removed from visible rust, and 5% of the area remains the same as the original rust. Use an alloy steel shovel to remove old paint from the gas cabinet. This oxide layer is extremely thin, and the natural luster of the stainless steel surface can be seen through it, giving the stainless steel a unique surface. Use a wire brush to remove internal rust from dead corners such as welds and reinforcement plates.

The adhesion between the coating and the substrate is an important indicator for evaluating the corrosion resistance of the coating. The stronger the adhesion, the better the corrosion resistance and the more durable the coating. Surface treatment completed. Epoxy coal tar primer can be applied twice to protect against moisture and rust. Use acetone or other volatile cleaners to remove oil, tar and other dirt on the surface of the gas cabinet. Clean the inside and outside of plastic-coated steel pipes. After cleaning, the surface should be dry, free of oil and dirt.