Malleable Pipe Elbow, PN 20, DN40

Sep 11, 2025

Malleable Female national pipe thread elbows are a type of pipeline fitting primarily used to connect two pipes and change their direction. Based on different connection methods and angles, they can be categorized into various types, including reducing elbows, equal elbows, 45-degree elbows, and 90-degree elbows.

 

Specification

Product: Malleable Pipe Elbow.

Material: ASTM A197.

Pressure: CL150 (PN 20).

Size: 1.5 Inch (DN 40).

Coating: GALVANISED.

Connection ends: FNPT (Female National Pipe Thread).

 

malleable-pipe-elbow

 

Comparative Analysis of Female Threaded Elbows and Regular Elbows

 

Definition and Structural Differences

1. Internal Threaded Elbows

Feature internal threads (typically NPT, BSPT standards) for screw-type pipe connections.

Made of brass/stainless steel, with smaller diameters (DN15-DN50), suitable for high-pressure water/gas systems (e.g., household gas pipelines).

Characterized by threaded interfaces at one or both ends.

2. Regular Elbows

Thread-free design, connected via welding, flanges, or socket joints. Materials include carbon steel, PVC, with wider diameter ranges (DN15-DN2000).

Available in 45°, 90°, 180° angles for fluid redirection, used in chemical pipelines or drainage systems.

 

Core Differences

1. Connection Methods

Internal Threaded Elbows: Rely on thread sealing (requires PTFE tape/thread sealant). Easy to disassemble but limited pressure resistance (typically ≤16Bar).

Regular Elbows: Welded/flanged connections offer higher stability and pressure capacity (carbon steel elbows can exceed 40Bar), but installation is complex.

2. Application Scenarios

Internal Threaded Elbows: Ideal for household plumbing, instrumentation, or spaces requiring frequent maintenance.

Regular Elbows: Preferred for industrial pipelines and municipal systems with high flow rates and long-term stability.

3. Cost and Maintenance

Internal Threaded Elbows: Lower unit cost (¥5-50/piece) but prone to thread wear leaks.

Regular Elbows: Higher initial cost (welding/fitting expenses) but longer lifespan.

 

Selection Guidelines

Pressure: High-pressure systems → Regular elbows (GB/T12459 compliant); low-pressure → Internal threaded elbows.

Diameter: DN50 and below → Internal threaded; above → welded elbows.

Media Compatibility: Corrosive fluids → Stainless steel internal threaded elbows (e.g., 316L); regular elbows can be lined with plastic.