Oil Casing

Aug 20, 2024

1. Types
According to SY/T6194-96 "Petroleum Casing", there are two types: short threaded casing and its couplings and long threaded casing and its couplings.
2. Specifications and appearance quality
(1) According to SY/T6194-96, domestic casing is not fixed in length, ranging from 8 to 13 meters. However, casing not shorter than 6 meters can be provided, and the number shall not exceed 20%.
(2) There shall be no folds, hairline cracks, delamination, cracks, rolling folds and scars on the inner and outer surfaces of the casing. These defects shall be completely removed, and the removal depth shall not exceed 12.5% ​​of the nominal wall thickness.
(3) There shall be no defects such as folds, hairline cracks, delamination, cracks, rolling folds and scars on the outer surface of the coupling.
(4) The threaded surface of the casing and coupling shall be smooth, and burrs, tears and other defects that are sufficient to interrupt the thread and affect the strength and tight connection are not allowed.
3. Chemical composition inspection
(1) According to SY/T6194-96. The casing and its couplings are made of the same steel grade. The sulfur content is less than 0.045%, and the phosphorus content is less than 0.045%.
(2) Take chemical analysis samples according to the provisions of GB222-84. Conduct chemical analysis according to the relevant provisions of GB223.
(3) According to the provisions of the American Petroleum Institute ARISPEC5CT1988, 1st edition. Chemical analysis is carried out according to the latest version of ASTME59 and the latest version of ASTME350.

API CT Casing
4. Physical property inspection
(1) According to the provisions of SY/T6194-96. Perform flattening test (GB246-97), tensile test (GB228-87) and water pressure test.
(2) According to the provisions of the American Petroleum Institute API SPEC 5 CT 1988, 1st edition, hydrostatic pressure test, flattening test, sulfide stress corrosion cracking test, hardness test (ASTM E18 or E10 latest version), tensile test, transverse impact test (ASTM A370, ASTM E23 and the latest version of relevant standards), grain size measurement (ASTM E112 latest version or other methods).
5. Packaging
According to SY/T 6194-96, domestic casing should be bundled with steel wire or steel belt. The exposed part of each casing and coupling thread should be screwed with a protective ring (wire guard) to protect the thread.

N80 Casing
6. Others
According to the American Petroleum Institute standard API SPEC 5 CT 1988, 1st edition, the casing steel grade is divided into 10 types: H-40, J-55, K-55, N-80, C-75, L-80, C-90, C-95, P-110, Q-125.
The casing should be supplied with threads and couplings, or with any of the following pipe end forms:
Flat end, round thread without coupling or with coupling, trapezoidal thread with coupling or without coupling, direct connection thread, special end processing, sealing ring structure.