Preheating techniques for alloy steel pipes before welding

Feb 18, 2024

Alloy Steel Pipes Supplier-GNEE

  • Preheating method before welding

The preheating method of alloy steel pipes before welding needs to be selected according to the actual situation. Generally, there are the following methods:
1. Crucible preheating method
The crucible preheating method is the most common method, using a special electric furnace to heat the pipes to a preset temperature. The temperature usually needs to be controlled above 200°C, and the preheating time is based on the pipe diameter and wall thickness.
2. Light preheating method
The lamp preheating method is the earliest method, using a torch to heat the surface of the pipe to a certain temperature to achieve an essential preheating effect. This method is mainly used for pipes with small diameters and thin walls, such as pipes under 1 inch.
3. Electromagnetic induction preheating method
The electromagnetic induction preheating method mainly uses the principle of electromagnetic induction heating, which can heat the pipe to a preset temperature. It has relatively high power density and heating speed and has been widely used in actual production.

45# steel pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  • Preheating steps before welding

The preheating step before welding needs to control the temperature and time to ensure the quality of the pipe. Here are the specific steps:
1. Preheat the areas on both sides of the weld to ensure temperature uniformity.
2. Control the preheating temperature and time. The temperature is generally 20°C higher than the preset temperature of the steel. The preheating time needs to be controlled according to the pipe diameter and wall thickness, usually about 30 minutes.
3. Cooling treatment, you can use fans and other methods for rapid cooling to avoid excessive heating and overheating of the pipeline.

welding pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  • Precautions

1. The temperature and time of preheating before welding must be controlled to avoid welding quality problems caused by excessive or insufficient preheating.
2. During preheating, be sure not to let the pipeline come into contact with water, oil, dust and other pollutants to avoid damage to the steel.
3. Choose the appropriate preheating method. Each method has its own scope of application.