What is SA213 T22 Superheater Tubes mechanical properties
Feb 05, 2026
T22 alloy steel pipes are mainly used in superheaters and reheaters of power plant boilers, as well as some heat exchange devices in the petrochemical industry. These components typically operate in environments with temperatures between 500°C and 600°C and at high pressures, placing extremely stringent requirements on the safety and durability of the materials. Compared to ordinary carbon steel pipes, T22 steel pipes exhibit significantly better strength retention and resistance to oxidation and corrosion at the same high temperatures.
GNEE Group specializes in supplying boiler tubes, is ASTM certified, and offers custom steel pipe services. Urgent purchase? Our 24-hour emergency supply channel is open!
Mechanical properties of SA213 T22 alloy Steel tube
|
Tensile Strength , MPa |
Yield Strength, MPa |
Elongation, % |
Hardness, HB |
|
415 min |
220 min |
30 min |
163 max |
ASTM A213/ASME SA213 T22 Tolerance
|
Outside Diameter |
OD Tolerance |
WT Tolerance |
Ovality Tolerance |
Cut Length Tolerance |
|
OD≤ 12, 7 mm |
± 0, 13 mm |
± 15 % |
– |
+ 3, 18 mm, – 0 mm |
|
12, 7 mm < OD ≤ 38, 1 mm |
± 0, 13 mm |
± 10 % |
max, 1, 65 mm |
+ 3, 18 mm, – 0 mm |
|
38, 1 mm < OD ≤ 88, 9 mm |
± 0, 25 mm |
± 10 % |
max, 2, 41 mm |
+ 4, 76 mm, – 0 mm |
SA213 T22 alloy Steel tube Performance Advantages:
High-Temperature Strength: Tensile strength ≥415MPa, yield strength ≥205MPa, elongation ≥30%, hardness ≤163HB, ensuring safety and reliability under high pressure environments.
Creep Resistance: During long-term operation below 580℃, the creep rate is significantly lower than that of ordinary carbon steel, resulting in low strength decay.
Oxidation Resistance: Chromium forms a stable oxide film, effectively resisting oxidation corrosion below 650℃ and extending service life.
Processing Performance: Good weldability and formability, supporting various processes such as hot rolling and cold drawing to meet complex shape requirements.
Key Technologies in SA213 T22 alloy Steel tube Cold Drawing Process
1. Billet Pretreatment: Hot-rolled perforated tubes are used as the base tube. After pickling to remove oxide scale (hydrochloric acid concentration 18-22%, temperature 60-70℃), phosphating is required to form a 5-10μm lubricating carrier layer. Practice at a large steel plant shows that using an oxalate conversion coating instead of traditional phosphating can reduce drawing force by 15%.
2. Multi-Pass Cold Deformation: The deformation amount per pass is typically controlled between 15-25%, with intermediate annealing between passes (holding at 760-790℃ for 30 minutes under a protective atmosphere). Baosteel's "three-pass drawing" process (cumulative deformation reaching 65%) shows that controlling the deformation amount of the final cold drawing to 8-12% can significantly improve the low-temperature impact toughness of the material.
3. Finished Product Heat Treatment: After final normalizing treatment (air cooling at 900-930℃), the metallographic structure should be uniform tempered bainite, and the hardness should be controlled within the range of 170-220 HB. A test report from a power plant project shows that the T22 steel pipe treated with optimized processes exhibited a 40% longer fracture time than the standard requirement in a 600℃/1000h creep rupture test.
SA213 T22 alloy Steel tube Application Scenarios:
Power Industry: Superheaters with wall temperatures ≤580℃, steam pipes and headers with wall temperatures ≤540℃ in supercritical boilers. For example, a 1000MW unit requires approximately 800 tons of T22 steel pipe.
Petrochemical Industry: High-temperature and high-pressure equipment such as hydrogenation reactors and cracking units, as well as auxiliary system piping in nuclear power plants.
Aerospace: High-temperature components of aircraft engines and gas turbines (such as combustion chambers and turbine blades) must meet the requirements of extreme operating conditions.
SA213 T22 alloy Steel tube factory

Real-time steel pipe inventory updates – click to check and secure stock now!







