Spiral Wound Gaskets per ASME B16.20
Oct 14, 2025
What Is a Spiral Wound Gasket
ASME B16.20 spiral wound gaskets are sealing gaskets formed by alternately overlapping and spirally winding high-quality stainless steel winding strips with flexible materials such as graphite, PTFE, and other non-asbestos fillers. The metal strips are spot-welded at the beginning and end to ensure the gasket's stability. These gaskets are typically supplied without inner and outer rings, and are suitable for raised-face, flat-face, or male-and-female-face flanges in medium- and low-pressure applications. With inner and outer rings added, they can also serve higher-pressure and confined-joint service.
Sealing Performance
ASME B16.20 spiral wound gaskets exhibit excellent compressibility and resilience, a multi-layer sealing structure, and a certain degree of self-tightening function. They are less sensitive to surface imperfections on flange sealing faces, do not bond to the flange sealing surfaces, and partially mitigate the effects of pressure fluctuations, temperature changes, and mechanical vibrations. Under harsh conditions such as high and low temperatures, high vacuum, and impact vibration, they maintain superior sealing performance. The metal winding provides mechanical strength and recovery, while the soft filler conforms to the flange surface and forms the actual seal.
Specification of This Gasket
| Item | Detail |
|---|---|
| Type | Spiral wound gasket |
| Material | PTFE packing, carbon steel outer ring, stainless steel inner ring |
| Size | 10 inch (DN250) |
| Pressure class | 300 LB (PN50) |
| Standard | ASME B16.20 |
Applications
Spiral wound gaskets are used in flanged joints of process piping, pressure vessels, heat exchangers, valves, and pumps in the oil and gas, petrochemical, power, and general process industries. The choice of winding material and filler depends on the service fluid, temperature, and pressure: 316L winding with graphite filler is the common combination for steam and hydrocarbon service, while PTFE filler suits chemical and corrosive media.
Installation Notes
Flange faces must be clean and free of scratches; the gasket should be centered on the bolt circle; bolts should be tightened in a crisscross sequence to the specified torque so the gasket compresses evenly. Never reuse a spiral wound gasket after the joint has been opened, because the filler will not recover its original performance.
Frequently Asked Questions
Q: What is a spiral wound gasket? A: A gasket formed by spirally winding metal strip with flexible filler, providing a multi-layer elastic seal.
Q: What standard applies? A: ASME B16.20 for metallic gaskets for pipe flanges.
Q: What fillers are used? A: Graphite, PTFE, and other non-asbestos flexible fillers, selected by service conditions.
Q: Can spiral wound gaskets be reused? A: No. After the joint is opened, the gasket should be replaced.
Q: What pressure classes are available? A: Common classes include 150 LB through 2500 LB, sized per the flange standard.
Q: Why use inner and outer rings? A> The outer ring centers the gasket and prevents blowout; the inner ring prevents filler extrusion into the bore.
Need spiral wound gaskets for your flanged joints? Contact us with size, pressure class, and service conditions for a quotation.







