Structural Characteristics of Lift Check Valves
Aug 15, 2025
Check valves are automatic valves whose closure element is a circular disc, operating through its own weight and medium pressure to prevent backflow. As critical pipeline equipment, they ensure prolonged service life and pipeline safety by blocking reverse media flow and protecting devices.
Based on structural design, check valves are categorized into three types: lift check valves, swing check valves, and butterfly check valves. Among these, lift check valves resemble globe valves structurally but lack a stem to drive the disc. Media enters from the lower inlet and exits through the upper outlet. The valve opens when inlet pressure exceeds the combined force of the disc weight and flow resistance; conversely, it closes upon media backflow.
Key structural features of lift check valves:
Steel lift check valves boast simple construction, reliable operation, and easy maintenance. Widely used in purification systems, petroleum, chemical, metallurgical, power generation, and textile industries.
When media flows in the direction indicated by the valve body arrow:
Opening: Media pressure generates upward thrust on the disc. The valve opens when thrust exceeds disc weight.
Closing: Valve closes when downstream pressure plus disc weight surpasses upstream pressure, preventing backflow.
These valves permit unidirectional flow only, blocking reverse flow. The disc can be:
Entirely metallic
Metal with leather/rubber inlays
Coated with synthetic overlays (flexible material selection).
The disc rests on the seat sealing surface of the valve body. Except for the freely lifting disc, other components mirror a globe valve:
Fluid pressure lifts the disc off the seat.
Media backflow forces the disc back onto the seat, cutting off flow.








