What are the commonly used pipe fittings
Nov 11, 2024
Fittings: Fittings are required to change the direction, elevation or diameter of the pipe in the piping system and to draw out branch pipes from the main pipe. As the pipe system has different shapes, simple and complex, therefore, more types of fittings. Commonly used fittings are elbows, tees,
- Cap: It is a plug used to close the pipe end. There are two kinds of commonly used heads: oval and flat. Oval head is also called pipe cap, its specification range is DN25~600mm, mostly used in medium and low pressure pipeline. Flat cap head is divided into two kinds according to its installation position, one kind of which is flat cap head is slightly larger than the outer diameter of pipe and is welded outside the pipe. The other one is that the flat cap head is slightly smaller than the inner diameter of the pipe, and the head plate is put into the pipe and welded. The commonly used specification range is DN15~200mm, and this kind of head is mostly used in the pipeline with lower pressure.
- Bump: It is also called pipe nozzle, which is a primary part of auto-control instrumentation professional on process pipeline, and it is installed by process pipeline professional, so the bump is also listed as pipe fittings. Process piping with a single pipe fitting also belongs to this kind, are welded on one end of the main pipe, the other end or to install other parts, or in addition to take over, the specification range of DN15 ~ 200mm, high school and low-pressure pipeline are used.

- blind: its role is to cut off the medium in the pipeline.
According to the use of pressure and flange sealing surface of the form of the following types:
1, smooth surface blind plate, and smooth sealing surface flange with the use of its applicable pressure range of 1.0 ~ 2.5MPa.
2,Convex surface blind plate, one side of itself with convex surface, the other side with concave surface, with concave-convex sealing surface flange with the use. Using pressure 4.0MPa, specifications range from DN25 to 400mm.
Trapezoidal groove blind plate is used in conjunction with trapezoidal groove sealing surface flange, the pressure range is 6.4-16.0MPa, the specification range is DN25-300mm.
- '8 "Type blind plate, also divided into smooth surface, concave-convex surface and trapezoidal groove surface three kinds, the use of pressure and the above three kinds of blind plate, "8' word blind plate is different, it is the combination of the two kinds of use in a component, that is, the blind plate and the gasket is connected to the fixed in the together. Flange pad into the blind, outside the exposed gasket as a visual sign of whether the pipe is cut off.

- "8 'Type blind plate manufacturing material has a variety of, according to the transport medium temperature and pressure to choose. General low-pressure pipeline, the temperature does not exceed 450 ℃, the material used in Q235A, 20 steel and 25 steel; temperature in 450 ~ 550 ℃, the material used in 15CrMo, 1Cr5Mo. When the pressure is 4.0 ~ 16.0MPa, the temperature is greater than 550 ℃, to use stainless steel.







