What is soft seated butterfly valves

Aug 01, 2025

A soft-seat butterfly valve (also known as a soft-seal butterfly valve) uses a non-metallic elastic material seat. Its core features and structure are as follows:

 

1. Structure and Core Components

Valve Seat Material

The elastic sealing ring is made of rubber, PTFE (polytetrafluoroethylene), or a polymer, providing low-pressure sealing performance.

The sealing ring can be fixed to the edge of the butterfly disc or the inner wall of the valve body.

Main Structure

Central Line Design: The valve stem axis coincides with the center of the butterfly disc and the centerline of the pipeline, providing symmetrical bidirectional sealing.

Valve Body Material: Mostly cast iron or stainless steel, with flanges at both ends for pipeline connection.

Disc: A circular plate structure that rotates 90° for opening and closing.

 

2. Performance characteristics

‌Features‌ ‌Advantages‌ ‌Limtations‌
‌Sealing‌ Zero leakage (low pressure working condition), elastic material fits tightly High-pressure working conditions are prone to failure
‌Heat resistance Applicable at room temperature (-20℃~80℃) High temperature prone to aging and deformation
‌Corrosion resistance‌ PTFE valve seat is resistant to acid and alkali corrosion Rubber material is not resistant to strong solvents
‌Operating torque‌ Small opening and closing torque, easy manual operation The valve seat needs to be replaced after wear

soft seated butterfly valves

3. Core Application Scenarios

Water Treatment Systems
Opening and closing water supply and drainage pipes, flow control in sewage treatment plants;
Low-pressure control of fire sprinkler systems.

Light Industry and Ventilation
Two-way opening and closing of ventilation and dust removal pipes (e.g., dust control in textile mills);
Clean fluid transportation in the food and pharmaceutical industries.

Chemical Processes
Intercepting weakly corrosive media (e.g., low-concentration acids and alkalis).

 

4. Selection Considerations

Prohibited Applications
Media containing hard particles (which may wear the seal);
Operating conditions with temperatures > 80°C or pressures > PN16.

Maintenance Points
Regularly check valve seat elasticity; replace immediately if aging or cracking occurs.
Avoid overtightening, which may cause permanent deformation of the seal.