What is the difference between T91 and T92 pipe
Jan 07, 2026
The main material differences between T91 and T92 lie in their alloy composition and high-temperature performance. T92, based on T91, significantly improves high-temperature strength and creep resistance by adjusting the molybdenum (Mo) content and adding elements such as tungsten (W).
Alloy Composition Differences:
T91: Based on 9Cr-1Mo-V-Nb, containing approximately 1% molybdenum (Mo) and no tungsten (W), strengthened by elements such as vanadium (V) and niobium (Nb).
T92: Based on the T91 composition, reducing molybdenum to 0.3%-0.6% and adding 1.5%-2.0% tungsten (W) to form W-Mo composite solid solution strengthening, with trace amounts of boron (B) added to strengthen grain boundaries.
High-Temperature Performance Comparison:
Strength and Allowable Stress: Below 600°C, the mechanical properties of both are similar, but above 600°C, the allowable stress of T92 is 34% higher than that of T91, and its creep strength at 650°C is 1.6 times that of T91.
In terms of maximum applicable temperature, T91 has an upper limit of approximately 650°C, while T92 can reach 675°C, making it more suitable for the high-temperature conditions of supercritical power plants. Their room temperature performance is similar, with both having a tensile strength ≥585MPa. However, T92 has slightly better low-temperature toughness, with an impact energy at -20°C that is 10%-15% higher than T91.
The applicable scenarios and costs differ.
T91 is mostly used in subcritical power plant boilers (parameters: 540-560°C, 16-25MPa); T92, due to its upgraded high-temperature performance, is suitable for supercritical/ultra-supercritical power plants (600-620°C, 25-30MPa), and is also used in higher-temperature petrochemical reaction tubes.
In terms of cost, T92 contains tungsten, resulting in raw material and smelting costs that are 15%-20% higher than T91. Selection should be based on the precision required for the operating conditions to avoid over- or under-performance.
A213 T91 T92 Boiler tube factory








