What is the tensile properties test

Oct 24, 2024

The tensile performance test is the most common test for steel pipes, which is used to test the yield and tensile strength of steel pipes.

Before the test, calibrate the test equipment to ensure the accuracy of the test data; prepare the test piece and mark the original gauge length; set the test force zero point to ensure that the force measurement system should not change during the test; select a suitable fixture to ensure that the clamped sample is subjected to axial tension. At the beginning of the test, stretch the sample at a specified rate until the sample breaks, and pay attention to record the data.

seamless steel pipe for fluid
Determination of tensile strength: Tensile strength is the stress corresponding to the corresponding maximum force.
Determination of upper yield strength: It can be measured from the force-extension curve or the peak force display, and is defined as the stress corresponding to the maximum force value before the force drops for the first time. The upper yield strength is calculated by dividing the force by the original cross-sectional area of ​​the sample.
Determination of elongation after fracture: The broken parts of the sample should be carefully matched together so that their axes are in the same straight line. Take special measures to ensure that the broken parts of the sample are properly in contact, measure the gauge length after the sample breaks, and calculate the elongation after fracture according to the formula.

seamless steel pipe for transport fluid