What is the yield strength of ASTM A335 P11 pipe
Jan 06, 2026
A335 P11 seamless steel pipe is a type of chromium-molybdenum alloy steel pipe belonging to the ASTM A335 standard, mainly used in high-temperature and high-pressure environments. According to the standard, the yield strength of this steel pipe is not less than 205 MPa, and the tensile strength is between 415 and 585 MPa. These strength specifications ensure that the steel pipe will not undergo plastic deformation or rupture under high pressure. It is worth noting that the actual compressive strength of the steel pipe is also closely related to geometric parameters such as wall thickness and diameter. In engineering design, the Barlow formula is usually used to calculate the theoretical pressure-bearing capacity of the steel pipe: P = (2St)/D, where P is the maximum working pressure, S is the material yield strength, t is the wall thickness, and D is the outer diameter.
Mechanical Properties
Tensile Strength: Not less than 415 MPa. This indicator reflects the steel pipe's ability to resist tensile failure, ensuring it can withstand a certain load without fracture under axial tensile force, thus guaranteeing the safety of the steel pipe in high-temperature and high-pressure systems.
Yield Strength: Not less than 205 MPa. Yield strength is the stress at which a material begins to undergo significant plastic deformation. This indicator ensures that the steel pipe will not easily undergo irreversible plastic deformation under certain pressure, which is crucial for applications such as high-pressure boiler tubes subjected to internal pressure.
Elongation: Not less than 30%. A high elongation indicates that the steel pipe has good plastic deformation capacity, allowing it to deform to a certain extent under external tensile force without brittle fracture. This toughness is critical for coping with complex operating conditions such as thermal stress during boiler operation.
Chemical Composition
Carbon (C): Content between 0.05% and 0.15%. Carbon improves the strength and hardness of steel, ensuring the structural stability of steel pipes under high temperature and pressure environments.
Manganese (Mn): Generally 0.30%-0.60%. Manganese refines grains, improving the strength and toughness of steel and enhancing the wear resistance of steel pipes.
Phosphorus (P): Not exceeding 0.025%. As an impurity element, phosphorus content must be strictly controlled; otherwise, it will reduce the toughness and weldability of steel.
Sulfur (S): Not exceeding 0.025%. Sulfur is also an impurity element; excessive content will adversely affect the toughness and weldability of steel.
Silicon (Si): Between 0.50% and 1.00%. Silicon is mainly used for deoxidation and also helps improve the strength of steel.
Chromium (Cr): Content... Chromium (1.00%-1.50%) enhances the oxidation and corrosion resistance of steel. At high temperatures, it forms a dense oxide film, preventing further oxygen erosion and extending the service life of the steel pipe.
Molybdenum (Mo): Between 0.44% and 0.65%, molybdenum significantly improves the thermal strength of steel, i.e., its strength and creep resistance at high temperatures. It also helps improve the toughness of the steel, enabling the steel pipe to better withstand stress under high temperature and high pressure conditions.
A335 P11 boiler tube factory








