
JIS G3441 Alloy Steel Tube
This Japanese Industrial Standard specifies alloy steel pipes, hereafter referred to as "pipes", for use in machinery, automobiles and other machine parts.
Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of jis g3441 alloy steel tube in China, also supports customized service with low price. Welcome to wholesale discount jis g3441 alloy steel tube for sale here from our factory. Contact us for free sample.
JIS G3441 Alloy Steel Tube Supplier-GNEE
The manufacturing method of pipes should be weldless or resistance welding. The tube principle is as manufactured or cold worked or only annealed. However, the orderer may specify an appropriate heat treatment other than annealing if necessary.
Grade: SCr420TK, SCM415TK, SCM418TK, SCM420TK, SCM430TK, SCM435TK, SCM440TK
OD: 38 - 426mm
WT: 5 - 60mm
Length: 3000-12000mm
Application: used for machinery, automobiles, and other machine parts.
Equivalent standards: ASTM A519, EN 10297-1
Chemical Composition and mechanical properties JIS G3441 Alloy Seamless Steel tube
Grade and Chemical Composition (%)
|
Grade |
C≤ |
Si |
Mn |
P≤ |
S≤ |
Cr |
Mo |
|
SCM 420TK |
0.18~ 0.23 |
0.15~ 0.35 |
0.60~ 0.85 |
0.030 |
0.030 |
0.90~ 1.20 |
- |
|
SCM 415TK |
0.13~ 0.18 |
0.15~ 0.35 |
0.60~ 0.85 |
0.030 |
0.030 |
0.90~ 1.20 |
0.15~ 0.30 |
|
SCM 418TK |
0.16~ 0.21 |
0.15~ 0.35 |
0.60~ 0.85 |
0.030 |
0.030 |
0.90~ 1.20 |
0.15~ 0.30 |
|
SCM 420TK |
0.18~ 0.23 |
0.15~ 0.35 |
0.60~ 0.85 |
0.030 |
0.030 |
0.90~ 1.20 |
0.15~ 0.30 |
|
SCM 430TK |
0.28~ 0.33 |
0.15~ 0.35 |
0.60~ 0.85 |
0.030 |
0.030 |
0.90~ 1.20 |
0.15~ 0.30 |
|
SCM 435TK |
0.33~ 0.38 |
0.15~ 0.35 |
0.60~ 0.85 |
0.030 |
0.030 |
0.90~ 1.20 |
0.15~ 0.30 |
|
SCM 440TK |
0.38~ 0.43 |
0.15~ 0.35 |
0.60~ 0.85 |
0.030 |
0.030 |
0.90~ 1.20 |
0.15~ 0.30 |
| Note: 1. Ni as an impurity in various steel pipes does not exceed 0.25%, and Cu does not exceed 0.30%; 2. When the purchaser requests the analysis of the finished product, the allowable deviation is as specified in Table 3 of JIS G0321. | |||||||
Tolerance of outside diameter and wall thickness
Tolerance of OD and W.T
|
Division |
Tolerance on O.D |
Tolerance on W.T |
||
|
Class 1 |
D<50m |
±0.5 mm |
S<4mm
|
+0.6mm -0.5mm |
|
50mm≤D |
±1% |
S≥4mm |
+1% -12.5% |
|
|
Class 2 |
D<50m |
±0.25mm |
S<3mm |
±0.3mm |
|
50mm≤D |
±0.5% |
S≥3mm |
±10% |
|
|
Class 3 |
D<25m |
±0.12 mm |
S<2mm |
±0.15mm |
|
40mm>D≥25mm |
±0.15 mm |
|
|
|
|
50mm>D≥40mm |
±0.18 mm |
S≥2mm |
±8% |
|
|
60mm>D≥50mm |
±0.20 mm |
Notes: tolerance on each wall thickness shall be rounded off to one decimal place in accordance with rule a JIS Z 8401 |
||
|
70mm>D≥60mm |
±0.23mm |
|||
|
80mm>D≥70mm |
±0.25 mm |
|||
|
90mm>D≥80mm |
±0.30mm |
|||
|
100mm>D≥90mm |
±0.40 mm |
|||
|
D≥100mm |
±0.50% |
|||
|
|
|
|
|
|
| 1. The OD tolerance of hot finish seamless steel pipe according to Class1 2. Quenched and tempered steel pipes according to 4 categories. | ||||
JIS G3441 Alloy Seamless Steel Tubes

Related Recommendations
A335 Seamless Alloy Steel Pipe
ASTM A355 P11 Alloy Steel Pipe
About Us
GNEE Group is a steel pipe supply chain group specializing in the production and export of steel pipes and steel pipe accessories. It exports 50 million tons of steel pipe products every year. We can provide hundreds of steel pipe products, such as A333 low-temperature carbon steel pipe, A213 alloy seamless pipe, A312 alloy seamless pipe, API 5L oil casing, A512 structural seamless steel pipe, etc. You are welcome to purchase at any time.

Hot Tags: jis g3441 alloy steel tube, China jis g3441 alloy steel tube manufacturers, suppliers, factory, P22 T22 Pipes Tubes, America A135 Gr BSeamless Steel Tube, JIS G3460 Steel pipes, API 5L PSL1 Seamless Carbon Steel Pipe, API 5CT C90 Oil Tubing, seamless tubing for water park attractions
Send Inquiry









