Boiler tube SA213MT12
Jun 04, 2025
1. Basic properties
Material standard
SA213MT12 is a chromium-molybdenum alloy steel grade in the ASME/SA-213M standard, which belongs to low-alloy heat-resistant steel pipe and corresponds to the ASTM A213 standard.
Application
Mainly used for water-cooled walls, superheaters, reheaters of high-pressure boilers and heat exchange pipes of petrochemical equipment, with an applicable temperature range of 450℃~650℃ and a working pressure ≥9.8MPa
2. Core performance parameters
- Chemical composition (%)
| Element | C | Mn | Si | Cr | Mo | P/S |
|---|---|---|---|---|---|---|
| Range | 0.05~0.15 | 0.30~0.61 | ≤0.50 | 1.90~2.60 | 0.87~1.13 | ≤0.030 |
- Mechanical properties
Tensile strength: ≥415 MPa
Yield strength: ≥220 MPa
Elongation: ≥30%
Suitable for long-term high temperature and high pressure conditions
3. Structural characteristics and process
Tube design
Including internal thread structure, which increases the heat exchange area by 30% and improves the heat conduction efficiency, especially suitable for water-cooled wall tubes.
Common specifications: outer diameter 31.8mm~76.2mm, wall thickness 5.5mm~12mm (such as 31.8×5.5mm typical size).
Manufacturing process
Adopt hot rolling or cold drawing seamless process to ensure no weld defects and meet the sealing requirements of high-pressure environment.
4. Key points of use and processing
Welding requirements
It needs to be preheated to 200℃~300℃, and tempered at 710℃~730℃ after welding to avoid cold cracks and improve toughness.
Limit the heat input to prevent grain coarsening and reduce strength.
Corrosion resistance treatment
The surface can be aluminized or chrome-plated to resist high-temperature sulfide and flue gas corrosion.








