Carbon Steel Pipe Elbows, ASTM A234 WPB, 2 Inch, THK 6.35 mm
Sep 12, 2025
Carbon Steel Butt-Weld Elbows: Manufacturing and Performance
Carbon steel butt-weld elbows are fittings connected to pipelines via welding, commonly manufactured through hot pushing, cold bending, or forging processes. Widely used in industries such as petroleum, chemical, power generation, shipbuilding, and construction, their quality directly impacts the safety and reliability of entire piping systems.
Material Composition and Standards
The performance of carbon steel elbows stems from their specialized material formulation. ASTM A234 WPB, the dominant standard, achieves an optimal balance between strength and ductility through precise elemental ratios:
Carbon (0.3%)
Manganese (0.29–1.06%)
Silicon (≥0.1%)
Core Advantages Over Stainless Steel
Cost Efficiency: Raw material costs are 40–60% lower, making them ideal for large-scale pipelines.
Weldability: No special treatment required when welded to same-material pipes, with a heat-affected zone crack rate <0.3%.
Pressure Resistance: Operates at 16 MPa at room temperature, 8–10× higher than PVC materials.
Specification
Product Name: ASTM A234 WPB Pipe Elbows
Material: Carbon Steel ASTM A234 WPB
Size: 2 Inch, DN50
Wall Thickness: 6.35 mm
End: Butt Weld
Surface Treatment: Black Coating
Application: Oil Transport








