Conditions and methods of ultrasonic testing of steel pipes

Mar 05, 2024

1. Detection environment
Ultrasonic testing of steel pipes needs to be carried out in a suitable environment. The testing environment should be kept relatively quiet to avoid interfering with the testing results. In addition, the temperature and humidity should be controlled within appropriate ranges. Normally, the temperature range of the detection environment is 5℃~40℃, and the humidity range is 20%~90%.

carbon steel pipe test

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


2. Probe selection
The probe used for ultrasonic testing of steel pipes should be of appropriate model and frequency. Common probe models include straight probes, inclined probes, C-type probes, etc. When choosing a probe model, you should choose it according to the shape and material of the object to be detected. The frequency is generally selected between 2MHz and 6MHz. The higher the frequency, the higher the detection accuracy, but the penetration depth of the probe will decrease.
3. Probe angle
The probe angle is one of the important factors affecting the detection results. During ultrasonic testing of steel pipes, the probe should move at a certain angle. Under normal circumstances, the angle between the probe and the surface to be detected should be about 45 degrees, and the contact between the probe and the surface to be detected should be kept close.

structural pipe test

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


4. Use of coating agent
The coating and oxide scale inside the steel pipe may affect the ultrasonic testing results of the steel pipe. Therefore, some coating agents can be used during ultrasonic testing of steel pipes. Coating agents can eliminate the effects of coatings and oxide scales, making detection results more accurate.