High pressure boiler tube tempering method

Feb 06, 2024

A heat treatment process in which 20G high-pressure boiler tubes quenched into martensite are heated to a temperature below the critical point, kept warm for an appropriate time, and then cooled to room temperature. The purpose of tempering is to eliminate quenching stress and transform the structure of high-pressure boiler tubes into a relatively stable state. Improve the plasticity and toughness of the steel without reducing or appropriately reducing the hardness and strength of the steel pipe to obtain the desired performance. Medium and high carbon steels are usually very hard after quenching, but are very brittle and generally require tempering before use.

20G High Pressure boiler pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The quenched martensite in high-pressure steel pipes is a supersaturated solid solution of carbon in -Fe. It has a body-centered square structure, and its squareness/ increases with the increase of carbon content (/=1+0.045wt%C). The martensite structure is thermodynamically unstable and has a tendency to transition to a stable structure. Many steels still have a certain amount of retained austenite after quenching, which is also unstable and will transform during the tempering process.

High pressure boiler tube

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Therefore, the tempering process is essentially a complex transformation process in which the 20G high-pressure boiler tube is heated within a certain temperature range to transition the thermodynamically unstable organizational structure in the steel to a stable state. The content and form of transformation vary depending on the chemical composition and structure of the quenched high-pressure boiler tube, as well as the heating temperature.