Pipe welding techniques

Feb 23, 2024

Things you need to prepare for ordinary welding, such as welding machine, welding wire, welding pliers, etc.

1. Manual arc welding:

A manual welding method that uses an arc as a heat source to melt the electrode and the base metal to form a weld. The arc temperature is around 6000-8000°C. Suitable for welding ferrous metals and some non-ferrous metals, with a wide range of applications, especially suitable for short welds and irregular welds.

2. Submerged arc welding (automatic and semi-braked) arc burns under the flux zone, using granular flux as a covering layer of the metal molten pool to isolate air from entering the molten pool. The welding wire is continuously fed into the arc area by the wire feeding mechanism, and the welding direction and moving speed of the arc are completed manually or mechanically.

It is suitable for welding straight welds and regular welds of carbon steel, low alloy steel, stainless steel, copper and other medium and thick plate materials.

3. Gas and electric welding:

(Gas shielded welding and argon arc welding) Arc welding that uses shielding gas to protect the welding area. The protective gas acts as a protective layer for the metal molten pool to isolate the air. The gases used include inert gas, reducing gas and oxidizing gas, which are suitable for welding of carbon steel, alloy steel, copper, aluminum and other non-ferrous metals and their alloys. Oxidizing gas is suitable for carbon steel and alloy steel alloys

4. Hot melt welding: PPR pipe installation tools, including hot melt tools and cutting tools, such as pressure regulators, electric fusion, heating devices, cutting machines, and also complete sets of integrated tools. Heating power selection of hot welding tools: usually 700-800W for pipes with an outer diameter of ≤63mm; 1200-1500W for pipes with an outer diameter of ≥75mm.

alloy welding pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The main welding methods of pipelines include the following:

1. Manual arc welding.

2. Cellulose downward welding process.

3. Low hydrogen type vertical downward electrode welding.

4. Weld the bottom of the cellulose electrode vertically and use CO2 gas shielded welding to fill the surface.

5. Semi-automatic welding with self-protected flux cored wire.

6. CO2 gas shielded semi-automatic or fully automatic welding with high-performance welding machine.

Alloy Pipelines

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pipe welding process parameters:

1. Selection of welding power source type and polarity:

Welding power source type: AC, DC;;

Polarity selection: forward connection, reverse connection;

2. Welding rod diameter:

Can be selected according to the thickness of the weldment. Generally, the greater the thickness, the thicker the diameter of the welding rod selected.

3. Selection of welding current:

When selecting welding current, there are many factors to consider, such as: electrode diameter, coating type, workpiece thickness, joint type, welding position, weld bead level, etc. But it is mainly determined by the diameter of the welding rod, the welding position, and the welding bead level.