What is T91 material
Feb 25, 2025
What is T91 material?
A213 T91 is a high-performance alloy steel pipe material that belongs to the American standard ASTM A213/A213M. This material is mainly used to manufacture high-temperature and high-pressure boiler and heat exchanger piping systems, and has the following characteristics:
High-temperature strength: T91 material exhibits excellent mechanical properties at high temperatures above 600°C, and is suitable for use in high-temperature and high-pressure environments.
Anti-oxidation properties: The increase in chromium content and the addition of trace nitrogen enhance the material's oxidation resistance and corrosion resistance.
Welding performance: Although the welding performance is poor, it can be improved through proper heat treatment.
This material is widely used in coal-fired power plants, gas-fired power plants, nuclear power plants, etc., for the manufacture of pipes and components for high-temperature and high-pressure boilers and heat exchanger systems, such as superheater tubes, reheater tubes, pipes, elbows, flanges, etc.
A213 T91 Type 1 Chemical composition (%)
| composition | C | Si | Mn | P | S | Cr | Ni | Mo | N | Ti | V | Nb | Zr | Al |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min | 0.07 | 0.2 | 0.3 | - | - | 8 | - | 0.85 | 0.03 | - | 0.18 | 0.06 | - | - |
| Max | 0.14 | 0.5 | 0.6 | 0.02 | 0.01 | 9.5 | 0.4 | 1.05 | 0.07 | 0.01 | 0.25 | 0.1 | 0.01 | 0.02 |
A213 T91 Type 1 Mechanical Properties
| Tensile Strength σb Mpa |
Yield point σs Mpa |
Elongation or elongation after fracture δ % |
Hardness HBW |
|---|---|---|---|
| ≥585 | ≥415 | ≥20 | 190~250 |
A213 T91 Type 2 Chemical composition (%)
| composition | C | Si | Mn | P | S | Cr | Ni | Cu | Mo | As | N | Ti | W | V | Nb | Zr | B | Al | Sn | Sb | More |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min | 0.08 | 0.2 | 0.3 | - | - | 8 | - | - | 0.85 | - | 0.035 | - | - | 0.18 | 0.06 | - | - | - | - | - | N/Al 4.0 min |
| Max | 0.12 | 0.4 | 0.5 | 0.02 | 0.005 | 9.5 | 0.2 | 0.1 | 1.05 | 0.01 | 0.07 | 0.01 | 0.05 | 0.25 | 0.1 | 0.01 | 0.001 | 0.02 | 0.01 | 0.003 |
A213 T91 Type 2 Mechanical Properties
| Tensile Strength σb Mpa |
Yield point σs Mpa |
Elongation or elongation after fracture δ % |
Hardness HBW |
|---|---|---|---|
| ≥585 | ≥415 | ≥20 | 190~250 |








