What is the composition of A213T91 boiler tube

Mar 12, 2025

What is the composition of A213T91?

 

The composition of A213T91 mainly includes the following chemical elements, and the approximate content range of each element is as follows:

Carbon (C): The content is between 0.08% and 0.12%. Carbon is a basic element in steel materials and has an important influence on the hardness, strength and wear resistance of the material. In A213T91, the carbon content is controlled at a low level to improve its plasticity and toughness.

Manganese (Mn): The content is between 0.30% and 0.60%. Manganese is mainly used for deoxidation, while improving the toughness of steel and increasing the strength of steel to a certain extent.

Silicon (Si): The content is between 0.20% and 0.50%. Silicon helps to enhance the strength and high temperature resistance of steel.

Phosphorus (P): The content does not exceed 0.020%. Phosphorus is regarded as an impurity element. Excessive phosphorus can make steel brittle and reduce its toughness and plasticity. In A213T91, the phosphorus content is strictly limited.

Sulfur (S): The content does not exceed 0.010%. Sulfur is also considered an impurity element and needs to be strictly controlled to maintain the purity and performance stability of the steel.

Chromium (Cr): The content is between 8.0% and 9.5%. Chromium can significantly improve the corrosion resistance, oxidation resistance, strength and toughness of steel. In A213T91, the higher chromium content gives it good high-temperature oxidation resistance.

Molybdenum (Mo): The content is between 0.85% and 1.05%. Molybdenum has a significant effect on the high-temperature strength and creep resistance of steel.

Niobium (Nb): The content is between 0.06% and 0.10%. As a microalloying element, niobium can refine the grains of steel and improve the strength and toughness of steel.

Nitrogen (N): The content is between 0.030% and 0.070%. The addition of nitrogen helps to optimize the organizational structure of steel and improve its performance.

Nickel (Ni): The content does not exceed 0.40%. Nickel can further improve the corrosion resistance and toughness of steel, but its content is limited to a low level in A213T91.

Aluminum (Al): The content does not exceed 0.040%. Aluminum is usually used for deoxidation, but its content is also strictly limited in A213T91.

A213 T91 Alloy Steel High Pressure Tube