SA-213 T91 Pipe Equivalent Materials: 10Cr9Mo1VNbN, 1.4903 and the P91 Connection

Mar 13, 2025

What SA-213 T91 Really Is

SA-213 T91 is a modified 9Cr-1Mo ferritic-martensitic heat-resistant steel developed for high-temperature boiler service, and it has become a workhorse grade for supercritical and ultra-supercritical steam generators. The T in the designation marks a tube product form supplied under ASME SA-213 / ASTM A213. The same chemistry supplied as pipe for headers and main steam lines is designated SA-335 P91, or ASTM A335 P91. Product form, together with the related dimensional, testing and marking requirements, is what separates the two designations; the metallurgy behind them is identical.

Recognized Cross-Standard Equivalents

When a drawing or project specification asks for an equivalent to SA-213 T91, the practical requirement is the corresponding designation in another standards system. The designations below are compositionally aligned and are therefore accepted for cross-standard substitution.

Standard system Designation UNS
ASME / ASTM (US) SA-213 T91 tube; SA-335 P91 pipe K90901
China, GB/T 5310 10Cr9Mo1VNbN A31108
Europe, EN 10216-2 X10CrMoVNb9-1 1.4903
ISO, ISO 9329-2 X10CrMoVNb9-1 not assigned

On the Chinese designation: the current GB/T 5310 name is 10Cr9Mo1VNbN, where the trailing N stands for nitrogen, a deliberate alloying element. In the older GB 5310-1995 edition the same steel appeared as 10Cr9Mo1VNb, so legacy drawings may still show the shorter spelling. The material itself was not changed; the name was updated to reflect the role of nitrogen in the chemistry.

Chemical Composition: Why It Is a Modified 9Cr-1Mo

The grade starts from the older 9Cr-1Mo chemistry and is strengthened with vanadium, niobium and nitrogen. Vanadium and niobium form fine, stable carbide and carbonitride precipitates, primarily VN and NbC, and nitrogen is what makes the VN dispersion effective. That dispersion is the source of the creep strength. Sulfur and phosphorus are held very low to protect toughness and weldability.

Element, % A213 T91 10Cr9Mo1VNbN X10CrMoVNb9-1
C 0.07-0.14 0.08-0.12 0.08-0.12
Si 0.20-0.50 0.20-0.50 0.20-0.50
Mn 0.30-0.60 0.30-0.60 0.30-0.60
P, max 0.020 0.020 0.020
S, max 0.010 0.010 0.005
Cr 8.00-9.50 8.00-9.50 8.00-9.50
Mo 0.85-1.05 0.85-1.05 0.85-1.05
V 0.18-0.25 0.18-0.25 0.18-0.25
Nb 0.06-0.10 0.06-0.10 0.06-0.10
N 0.030-0.070 0.030-0.070 0.030-0.070
Ni, max 0.40 0.40 0.40

The only visible difference between the European and the American tables is the sulfur limit, held at 0.005 % in EN 1.4903 against 0.010 % in the ASME and GB/T 5310 tables. That difference does not change the substitution logic, but it does mean a European heat will normally sit inside the American limit as well.

Mechanical Properties, Heat Treatment and Creep Behaviour

Property Requirement
Tensile strength, min 585 MPa
Yield strength, min 415 MPa
Elongation, min, longitudinal 20 %
Hardness 250 HBW max

Heat treatment is the same for T91 and for 10Cr9Mo1VNbN: normalize at 1040-1080 C followed by tempering at 750-780 C. Wall thickness above 70 mm may instead be quenched and tempered. Tempering produces the tempered martensite structure that delivers the creep performance, so the heat-treatment condition stated on the mill test certificate matters as much as the chemistry itself.

Service Temperature, Applications and Welding

Superheater and reheater tubing: metal temperature up to about 625 C under GB/T 5310, while ASME practice commonly allows roughly 650 C for reheater sections.

High-temperature headers and steam piping, supplied as P91: typically limited to about 600 C metal temperature.

Other service: nuclear heat exchangers and cracking furnace tubes in oil refining.

Below about 620 C the creep strength of this grade exceeds that of common austenitic stainless grades such as TP304H, while lower thermal expansion and higher thermal conductivity give better thermal fatigue resistance. That combination is the reason it displaced austenitic grades in this temperature window.

Preheat and interpass temperature: typically 200-300 C, to prevent hydrogen-induced cold cracking.

Matching consumables: 9Cr-1Mo-V-Nb filler such as ER90S-B9 or E9018-B9 keeps weld metal chemistry consistent with the base metal.

Post-weld heat treatment: mandatory, normally 730-780 C. Without it, untempered martensite remains in the weld and in the heat-affected zone and is brittle.

Type IV cracking: the intercritical heat-affected zone is the weak link in long-term service, so heat input and post-weld heat treatment are controlled to limit softening there.

The same welding procedure applies whether the material is supplied as T91 tube or as 10Cr9Mo1VNbN tube, because the metallurgy is the same.

Frequently Asked Questions

Q: Is SA-213 T91 the same material as SA-335 P91?
The chemistry is the same 9Cr-1Mo-V-Nb steel. T91 is the tube product form under ASME SA-213, and P91 is the pipe product form under ASME SA-335 used for headers and steam lines.

Q: What is the Chinese equivalent of SA-213 T91?
The equivalent is 10Cr9Mo1VNbN under GB/T 5310. Older drawings may show 10Cr9Mo1VNb from GB 5310-1995; the steel is the same.

Q: What is the European equivalent of T91?
X10CrMoVNb9-1 with material number 1.4903, specified in EN 10216-2 for seamless tubes and pipes for pressure purposes.

Q: Can T91 and 10Cr9Mo1VNbN be substituted for each other?
Yes. The composition, mechanical requirements and heat treatment are aligned, so the same welding procedure and post-weld heat treatment apply to both.

Q: What is the maximum service temperature of T91 tubing?
GB/T 5310 permits metal temperatures to about 625 C for superheater and reheater tubing, while headers and steam piping in the P91 form are typically limited to about 600 C.

Q: Is post-weld heat treatment always required for T91?
Yes. PWHT at approximately 730-780 C is mandatory for this martensitic grade, because an untreated weld and heat-affected zone remain brittle and crack-prone.