What is the composition of SA213 T9 alloy pipe
Jan 07, 2026
As the core material of ASTM A213 T9 high-pressure alloy seamless steel pipe, 9Cr-1Mo-V martensitic heat-resistant steel (corresponding to the domestic grade 12Cr9Mo/1Cr9Mo) is strengthened with molybdenum-vanadium alloy, achieving higher creep resistance and high-temperature oxidation resistance than T5 (5Cr-1Mo). This golden ratio of "9% chromium + 1% molybdenum + vanadium-titanium microalloying" ensures stable mechanical properties even at a high temperature of 593℃, making it an essential pipe material for high-pressure applications such as supercritical power plants and marine boilers.
chemical composition
| chemical composition | C | Cr | Mo | V | Mn | Si | S | P |
|---|---|---|---|---|---|---|---|---|
| Value | ≤0.15 | 8.0-10 | 0.90-1.10 | 0.18-0.25 | 0.3-0.6 | 0.25-1.00 | ≤0.025 | ≤0.025 |
Advantages:
Pressure Resistance: Withstands a maximum working pressure of 17.5MPa (supercritical boiler standard)
High Temperature Resistance: Long-term service temperature ≤593℃, short-term peak temperature 650℃ without deformation
Fatigue Resistance: No cracks after 10^6 cycles of alternating load testing (suitable for high-frequency start-stop systems in marine boilers)
Applications:
Power Plant Boilers: Superheaters and reheaters in supercritical units (e.g., 600MW thermal power units)
Marine Propulsion: High-pressure boilers for LNG carriers, steam systems for ocean-going cargo ships (DNV certified)
Petrochemical Equipment: Hydrogenation reactor piping, high-temperature pyrolysis furnace tubes (H2S corrosion resistant certified)
Ordering Instructions:
Orders for materials conforming to this standard should include the following items as needed, fully specifying the required materials:
1. Quantity (feet, meters, or number of pieces).
2. Material name (seamless tubes).
3. Grade.
4. Surface condition (hot-finished or cold-finished).
5. Controlled metallographic characteristics.
6. Dimensions (outer diameter and minimum wall thickness, unless average wall thickness is specified).
7. Length (fixed length or unfixed length).
8. Hydrostatic test or non-destructive electrical test.
9. Standard number and publication year.
10. Increased sulfur content (to improve machinability).
11. Special requirements and any optional supplementary requirements.
A213 T9 alloy steel pipe factory








