A335/SA335 P9 Seamless Ferritic Alloy Steel Tube
A335/SA335 P9 Seamless Ferritic Alloy Steel Tube
video
A335/SA335 P9 Seamless Ferritic Alloy Steel Tube
A335/SA335 P9 Seamless Ferritic Alloy Steel Tube suppliers
A335/SA335 P9 Seamless Ferritic Alloy Steel Tube factory
1/2
<< /span>
>

A335/SA335 P9 Seamless Ferritic Alloy Steel Tube

ASTM A335/ASME SA335 P9 seamless ferritic alloy steel tube is a high-performance 9Cr-1Mo chromium-molybdenum heat-resistant steel product designed for high-temperature and high-pressure industrial applications. As a well-established chromium-molybdenum heat-resistant steel grade widely used in elevated-temperature service, P9 combines excellent high-temperature strength, oxidation resistance, and long-term creep resistance, making it a reliable choice for power generation, petrochemical refining, and industrial heating systems.

Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of a335/sa335 p9 seamless ferritic alloy steel tube in China, also supports customized service with low price. Welcome to wholesale discount a335/sa335 p9 seamless ferritic alloy steel tube for sale here from our factory. Contact us for free sample.

 

Products Description

 

A335/SA335 P9 is a seamless ferritic alloy steel tube specified under ASTM A335 / ASME SA335, Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service.

It belongs to the chromium-molybdenum ("chrome-moly") steel family and is characterized by a nominal 9Cr-1Mo alloy composition, providing an excellent balance of elevated-temperature strength, oxidation resistance, and creep performance.

The "P" designation identifies a pressure-pipe grade intended for high-pressure piping systems operating at elevated temperatures.

For smaller-diameter boiler, superheater, and heat-exchanger applications, the equivalent alloy is specified under ASTM A213 Grade T9. P9 and T9 share essentially identical chemical composition and mechanical properties but differ in dimensional range and intended service.

A commonly referenced UNS designation for P9 steel is K90941.

 

Alloy steel seamless pipe/tube
PIPES & TUBES : ASTM A335, ASTM A213, ASTM A691
PIPES FITTINGS : ASTM A234
FITTINGS & FLANGES : ASTM A182
GRADES : P1/P5/P9/P11/P12/P22/P91 & T5/T9/T11/T22/T91
FORM (PIPES) : SEAMLESS / E.R.W / EFSW
Available Shapes :

Tubes & Pipes (SEAMLESS ) up to 30".

Tubes & Pipes (ERW ) up to 60".

Sheets / plates up to 150 MM.

Rod / Bar up to 350 MM.

Circle up to 1000 & Above as per your requirements.

thickness up to 200 MM & Above as per requirements.

 

ASTM A335 Gr P9 Alloy Steel Seamless Tube For High Temperature Service Composition

C, % Mn, % P, % S, % Si, % Cr, % Mo, %
0.015 max 0.30-0.60 0.025 max 0.025 max 0.50 max 4.00-6.00 0.45-0.65

Note: P9 contains approximately 8–10% chromium and is classified as a ferritic chromium-molybdenum alloy steel. It is not considered stainless steel.

Need PMI reports or full chemical composition verification?

We provide EN 10204 3.1/3.2 certification and third-party inspection support.

Request Material Certificates

 

ASTM A335 P9 Chrome Moly Pipes Properties

Tensile Strength, MPa Yield Strength, MPa Elongation, %
415 min 205 min 30 min

 

High-Temperature Performance

P9 is designed for long-term service at temperatures typically ranging from 540°C to 600°C (1000°F–1110°F).

Key advantages include:

Excellent creep resistance under sustained high-temperature loading

Strong oxidation resistance through formation of a stable chromium-rich oxide layer

Better high-temperature sulfidation resistance than carbon steel

Stable long-term microstructure under elevated-temperature service conditions

These properties make P9 particularly suitable for steam systems, refinery heaters, and process piping operating under severe thermal conditions.

 

Manufacturing Process & Heat Treatment

Seamless Tube Manufacturing

A335 P9 tubes are produced using seamless manufacturing methods, including hot-finished and cold-drawn processes.

Typical production stages include:

Billet inspection and preparation

Heating and rotary piercing

Rolling and elongation

Heat treatment

Sizing and straightening

Nondestructive examination

Final inspection

Cold-drawn tubing can achieve tighter dimensional tolerances and improved surface finish compared with hot-finished products.

 

Heat Treatment Requirements

Heat treatment is critical to achieving the required microstructure and mechanical properties.

ASTM A335 permits the following heat-treatment methods:

Full Annealing

Heating above the transformation temperature followed by slow furnace cooling.

Isothermal Annealing

Heating above the critical temperature, followed by controlled isothermal holding and cooling.

Normalizing and Tempering

Normalizing above approximately 900°C followed by tempering at not less than 675°C (1250°F).

Normalizing and tempering is the most commonly used condition for industrial P9 pipe production.

For fabricated piping systems, post-weld heat treatment (PWHT) is generally required by applicable piping codes and project specifications to reduce residual stress and restore desired mechanical properties.

 

Dimensions & Tolerances

Size Range

Outside Diameter: 1/8" to 24" (10.3 mm–610 mm)

Wall Thickness: Schedule 10 through Schedule 160, including STD, XS, and XXS

Length: Single Random, Double Random, or Cut Length

End Types: Plain End (PE), Beveled End (BE), Threaded End

 

Dimensional Tolerances

Dimensional tolerances shall comply with ASTM A335 requirements.

 

Outside Diameter Tolerance

OD Range Tolerance
1/8"–1½" ±0.40 mm
>1½"–4" ±0.79 mm
>4"–8" +1.59 / -0.79 mm
>8"–12" +2.38 / -0.79 mm
>12" ±1% OD

 

Wall Thickness Tolerance

As specified by ASTM A335 according to pipe size and t/D ratio.

Check Availability & Lead Time

 

ASTM A335 Gr P9 Equivalent Material

Standard System Equivalent Grade
ASTM / ASME A335 P9 / SA335 P9
ASTM Boiler Tube A213 T9
EN X11CrMo9-1 (1.7386)
JIS STBA 26
GOST 12ХМ (12KhM)

 

Same-Alloy Product Form Cross-Reference

Product Form Standard Grade
Pipe ASTM A335 P9
Boiler Tube ASTM A213 T9
Forged Flange ASTM A182 F9
Pipe Fitting ASTM A234 WP9
Pressure Vessel Plate ASTM A387 Grade 9

Although manufactured under different standards, these grades utilize essentially the same chromium-molybdenum alloy system.

 

Advantages & Limitations

Advantages

Excellent high-temperature strength and creep resistance

Superior oxidation resistance compared with carbon steel

Good fabrication characteristics when proper procedures are followed

Good weldability with appropriate preheat and PWHT

Established global supply chain and manufacturing base

Cost-effective alternative to higher-alloy stainless steels and nickel alloys

Limitations

Limited low-temperature toughness

Requires controlled welding procedures

Not intended for highly corrosive environments requiring stainless steel or nickel alloys

Higher cost than carbon steel and low-alloy Cr-Mo grades

Susceptible to brittle fracture at very low temperatures

 

Application of ASTM A335 P9 Ferritic Alloy Steel Pipe For High Temperature

A335 P9 seamless tubes are widely used in industries requiring reliable elevated-temperature and pressure service.

Power Generation

Main steam piping

Reheater piping

Superheater systems

High-pressure boiler components

Petroleum Refining

Furnace tubes

Hydroprocessing units

High-temperature process piping

Petrochemical Industry

Reactor piping

Cracking units

Process transfer lines

Industrial Heating

Heat-treatment furnaces

Thermal cracking systems

Process heaters

Oil & Gas

Enhanced oil recovery facilities

High-temperature production piping

Chemical Processing

High-temperature process equipment

Pressure piping systems

 

Welding & Fabrication Best Practices

Proper welding procedures are essential for maintaining long-term performance.

Preheat

150–200°C (300–400°F) is commonly used to reduce hydrogen-induced cracking risk.

Welding Processes

Applicable welding methods include:

GTAW (TIG)

SMAW

GMAW (MIG)

Oxyacetylene welding is generally not recommended.

Interpass Temperature

Should be controlled according to approved welding procedures to avoid excessive grain growth.

Post-Weld Heat Treatment

PWHT is typically performed at 730–760°C (1350–1400°F) in accordance with applicable codes and project requirements.

 

Inspection & Certification

Standard inspection requirements may include:

Hydrostatic testing or equivalent NDE

Ultrasonic testing (UT)

Eddy current testing (ET)

Mechanical testing

Chemical composition analysis

Positive Material Identification (PMI)

Dimensional inspection

Visual and surface examination

 

Available documentation and project requirements may include:

EN 10204 3.1 / 3.2 Material Test Certificates

Third-party inspection (SGS, TÜV, DNV, Lloyd's, etc.)

NACE MR0175 compliance when required

IBR approval for Indian boiler projects

Compliance with applicable NORSOK material requirements for offshore projects

 
GNEE A335/SA335 P9 Alloy Steel Pipe in stock
 
A335/SA335 P9 seamless ferritic alloy-steel pipe
A335/SA335 P9 seamless ferritic alloy-steel pipe
A335 P9 seamless ferritic alloy-steel pipe
A335 P9 seamless ferritic alloy-steel pipe

 

Frequently Asked Questions (FAQ)

Q1: What Is The Difference Between A335 P9 And A213 T9?

P9 and T9 share essentially the same alloy chemistry and mechanical properties. The primary difference is product form and application: P9 is used for pressure piping, while T9 is intended for boiler, superheater, and heat-exchanger tubing.

Q2: What Is The Maximum Long-Term Service Temperature For P9?

P9 is commonly used for long-term service up to approximately 600°C (1110°F), depending on design stress requirements and applicable codes.

Q3: What Is The UNS Designation For P9 Steel?

A commonly referenced UNS designation for P9 steel is K90941.

Q4: Is P9 Stainless Steel?

No. P9 is a ferritic chromium-molybdenum alloy steel containing approximately 8–10% chromium. Stainless steels typically contain at least 10.5–12% chromium together with a corrosion-resistant microstructure.

Q5: What Is The Difference Between P9 And P91?

P91 contains vanadium, niobium, and nitrogen additions that significantly improve creep strength and elevated-temperature performance. P91 is commonly used in ultra-supercritical power plants, whereas P9 is typically selected for moderate-to-high temperature service.

Q6: Does ASTM A335 Specify A Hardness Requirement For P9?

No. ASTM A335 does not specify a hardness limit for P9. However, project specifications may impose hardness restrictions for particular applications.

Q7: Is PWHT Required For P9 Welds?

In most industrial applications, PWHT is required by the governing piping code, welding procedure specification, or project requirements. Typical PWHT temperatures range from 730°C to 760°C.

Q8: Can P9 Be Used For Cryogenic Service?

No. P9 is not suitable for cryogenic service because ferritic chromium-molybdenum steels exhibit poor low-temperature toughness.

Hot Tags: a335/sa335 p9 seamless ferritic alloy steel tube, China a335/sa335 p9 seamless ferritic alloy steel tube manufacturers, suppliers, factory, DIN 17175 ST 35 8 Seamless Steel Boiler Tubes, Marine Seamless Steel Pipe, seamless tubing for water park attractions, API 5CT Steel Casing Pipe, seamless tubing for greenhouse systems, Hot Rolled Seamless Steel Pipe

Send Inquiry

(0/10)

clearall