ASTM A335 Alloy Steel Pipe
Nov 04, 2025
The ASTM A335/A335M-10a standard applies to seamless ferritic alloy steel pipes with nominal wall thickness and minimum wall thickness intended for use in high-temperature environments. These pipes are primarily used in power plant boilers, petrochemical equipment, and other industrial systems operating under high-temperature and high-pressure conditions. The standard explicitly states that pipes ordered under this specification must be suitable for bending, flaring (vanstoning), and similar forming operations, as well as fusion welding. This requirement necessitates that the steel pipes possess excellent workability and weldability during the manufacturing process.
Specification
| Product name | Alloy Seamless Pipe ASTM A335 P2 P5 P9 P11 P22 P91 P92 alloy tubes |
| Brand | Yingke |
| Specification | O.D :10.3mm - 914.4mm |
| W.T.: 2mm - 60mm | |
| Length | max 12000mm by fixed length or random length as per request . |
| Standard | DIN 17175,ASTM A335,A213,ASME 210,210C etc |
| Material | A213 T1, T2, T11, T5, T9, T22, T23, T91, T92 |
| A335 P1, P2, P5, P9, P12, P11, P22, P91, P92 | |
| ASME SA210 , SA210C (other material like SAE4130,4140,1541,27Simn,30CrMo, 12Cr1MoV , 15CrMo, 35CrMo etc ) | |
| Ends | Plain ends or beveled ends |
| Raw Material | Steel bar pipe |
| Calculation of Theoretic Weight | ? Kgs /m = {(OD – W.T ) *W.T }*0.02466 |
| Marking | As per our standard or clients' request . |
| Package | Packing in bundles, special packing can be offered by customers' requirement |
| or contact, such as wooden packing outside the pipes and so on. | |
| Certificate | Mill Testing Certificate |
| Usage | Alloy pipe applies to petroleum, chemical industry, electric power, boiler, high temperature resistant, low temperature resistant, corrosion resistant alloy pipe |
| Remark | We could produce as per client's special request . |
ASME SA335 / ASTM A335 Chemical Composition:
|
Grade |
UN |
C≤ |
Mn |
P≤ |
S≤ |
Si≤ |
Cr |
Mo |
|---|---|---|---|---|---|---|---|---|
|
A335 P1 |
K11522 |
0.10~0.20 |
0.30~0.80 |
0.025 |
0.025 |
0.10~0.50 |
– |
0.44~0.65 |
|
A335 P2 |
K11547 |
0.10~0.20 |
0.30~0.61 |
0.025 |
0.025 |
0.10~0.30 |
0.50~0.81 |
0.44~0.65 |
|
A335 P5 |
K41545 |
0.15 |
0.30~0.60 |
0.025 |
0.025 |
0.5 |
4.00~6.00 |
0.44~0.65 |
|
A335 P5b |
K51545 |
0.15 |
0.30~0.60 |
0.025 |
0.025 |
1.00~2.00 |
4.00~6.00 |
0.44~0.65 |
|
A335 P5c |
K41245 |
0.12 |
0.30~0.60 |
0.025 |
0.025 |
0.5 |
4.00~6.00 |
0.44~0.65 |
|
A335 P9 |
S50400 |
0.15 |
0.30~0.60 |
0.025 |
0.025 |
0.50~1.00 |
8.00~10.00 |
0.44~0.65 |
|
A335 P11 |
K11597 |
0.05~0.15 |
0.30~0.61 |
0.025 |
0.025 |
0.50~1.00 |
1.00~1.50 |
0.44~0.65 |
|
A335P12 |
K11562 |
0.05~0.15 |
0.30~0.60 |
0.025 |
0.025 |
0.5 |
0.80~1.25 |
0.44~0.65 |
|
A335P15 |
K11578 |
0.05~0.15 |
0.30~0.60 |
0.025 |
0.025 |
1.15~1.65 |
– |
0.44~0.65 |
|
A335 P21 |
K31545 |
0.05~0.15 |
0.30~0.60 |
0.025 |
0.025 |
0.5 |
2.65~3.35 |
0.80~1.60 |
|
A335 P22 |
K21590 |
0.05~0.15 |
0.30~0.60 |
0.025 |
0.025 |
0.5 |
1.90~2.60 |
0.87~1.13 |
|
A335 P91 |
K91560 |
0.08~0.12 |
0.30~0.60 |
0.02 |
0.01 |
0.20~0.50 |
8.00~9.50 |
0.85~1.05 |
|
A335 P92 |
K92460 |
0.07~0.13 |
0.30~0.60 |
0.02 |
0.01 |
0.5 |
8.50~9.50 |
0.30~0.60 |
Chrome Moly Pipes: Werkstoff vs EN vs ASTM
| Werkstoff /DIN | EN | ASTM |
|---|---|---|
| 1.5415 | 16Mo3 | A335 Grade P1 |
| 1.7335 | 13CrMo4-5 | A335 Grade P11, P12 |
| 1.7380 | 10CrMo9-10 | A335 Grade P22 |
| 1.7362 | X11CrMo5 | A335 Grade P5 |
| A335 Grade P9 | ||
| 1.4903 | X10CrMoVNb9-1 | A335 Grade P91 |
ASME SA335 / ASTM A335 Tensile Requirements
| Tensile Strength, min., psi | P-5 | P-9 | P-11 | P-22 | P-91 |
|---|---|---|---|---|---|
| ksi | 60 | 60 | 60 | 60 | 85 |
| MPa | 415 | 415 | 415 | 415 | 585 |
| Yield Strength, min., psi | |||||
| ksi | 30 | 30 | 30 | 30 | 60 |
| MPa | 205 | 205 | 205 | 205 | 415 |
Note: P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC].
Test and inspection

Packaging and shipping








