What is the difference between A335 P9 and P91

Jul 09, 2025

A335 P91 alloy pipe and A335 P9 alloy pipe are the same type of steel pipes under the American standard A335 specification. They both have the advantages of high temperature and high pressure resistance and are mainly used in the manufacture of equipment in high temperature and high pressure environments such as electricity, petrochemicals, and nuclear energy. The specific difference between the two lies in the different chemical composition, which leads to different mechanical properties and also affects the different properties of the steel itself. The specific differences are as follows:

1. Core composition difference
P9 (basic chromium-molybdenum steel)
Traditional 9Cr-1Mo system (Cr≈9%, Mo≈1%), no microalloy strengthening elements.
High carbon content (0.15%–0.25%), sacrifices weldability for strength.
P91 (reinforced chromium-molybdenum-vanadium steel)
V, Nb, N (vanadium 0.18%–0.25%, niobium 0.06%–0.10%, nitrogen 0.03%–0.07%) are added to P9.
Carbon content is reduced (0.08%–0.12%), improving weldability and toughness.
2. High temperature performance comparison
Heat strength
P9: Applicable temperature ≤600℃, 600℃ heat strength is only 1/3 of P91.
‌P91‌: The endurance strength at 620℃ is ≥100MPa, and the allowable stress above 550℃ is 2 times that of P9.
‌Anti-oxidation and corrosion resistance‌

P91 is strengthened by precipitation of vanadium-niobium carbides, and its resistance to steam corrosion is better than that of P9.

P9 is prone to high-temperature sulfur corrosion in sulfur-containing environments, and P91 inhibits grain boundary oxidation due to nitrogen.

A335 P9 pipe

3. Application scenario differentiation‌
‌Typical applications of P9‌

Heating furnace tubes ≤600℃ in petroleum refining units (such as the radiation section of cracking furnaces).

Superheater/reheater pipes of medium and low pressure boilers (medium temperature ≤550℃).

‌Irreplaceability of P91‌

Supercritical power plants: main steam pipes and headers with wall temperatures ≤625℃ (reduced wall thickness by 50% vs P9). ‌Nuclear power heat exchanger‌: significantly better than P9 in thermal fatigue and radiation embrittlement resistance‌

4. ‌Process and cost differences‌
‌Welding sensitivity‌: ‌P9 requires ‌≥300℃ preheating + post-weld stress relief heat treatment‌, P91 has stricter requirements (interlayer temperature control ≤250℃ + special welding material ER90S-B9)‌. ‌Economical‌: ‌P91 unit price is about ‌1.8 times that of P9, but the life cycle cost is 30% lower (thinning + no frequent replacement)‌. ️ Clarification of key misunderstandings‌
‌Organization type‌: ‌Both are ‌martensitic heat-resistant steel‌ (non-pearlite)‌. ‌Hydrogen embrittlement risk‌: ‌Vanadium/niobium carbides of P91 can capture diffusible hydrogen and are more resistant to hydrogen-induced cracking than P9‌.

A335 P91 seamless alloy steel pipe