seamless tube cold drawn material ASTM A179/ASME S-A-179
Jun 04, 2025 Inspection-Report-Of-ASTM-A179-1.pdf
Core Standards and Scope of Application
Standard Definition
ASTM A179 / ASME SA-179 is suitable for seamless cold-drawn low-carbon steel tubes for heat exchangers, condensers and other heat transfer equipment. It is designed for minimum wall thickness to ensure efficient heat conduction and pressure resistance.
Applicable Scenarios
Tubular heat exchangers, condensers, evaporators and similar heat transfer equipment;
Working temperature is usually ≤450℃, low pressure to medium pressure conditions (such as chemical and power industries).
Specifications and size requirements
| Parameter | Range | Special restrictions |
|---|---|---|
| Outer diameter | 3.2mm~76.2mm(1/8inch~3inch) | The mechanical properties of steel pipes with an outer diameter of less than 3.2 mm or a wall thickness of less than 0.4 mm are not applicable. |
| Wall thickness | ≥0.4mm(General range0.5mm~5.0mm) | Minimum wall thickness pressure requirements must be met |
| Units of measurement | Inch-pounds or SI millimeter-kilograms | Mixing of unit systems is prohibited and orders must be clearly marked |

Materials and properties
1. Chemical composition (%)
| Element | C | Mn | P≤ | S≤ |
|---|---|---|---|---|
| Scope | 0.06~0.18 | 0.27~0.93 | 0.035 | 0.035 |
2. Mechanical properties
Tensile strength: 360~480 MPa
Yield strength: ≥220 MPa (typical value)
Elongation: ≥30%
Suitable for cold bending (such as U-shaped tubes) and anti-vibration fatigue scenarios.
Manufacturing and quality control
Process requirements
The raw materials must comply with the A450/A450M standard, adopt the cold-drawn seamless process, and welding is prohibited;
The surface must be smooth and free of defects to ensure heat transfer efficiency.
Test items
100% water pressure test (test pressure ≥ 1.5 times the working pressure);
Eddy current flaw detection or ultrasonic testing to eliminate micro cracks.








